| 講演抄録/キーワード |
| 講演名 |
2007-01-27 10:10
自律制御型電磁界感応機能性材料による電波吸収体の特性改善法について ○河村主税・小塚洋司(東海大) EMCJ2006-111 |
| 抄録 |
(和) |
これまで,種々の形質を発現する生物細胞に見立てた単位セル(電子回路網)と固体の物質構成を象徴する結晶格子概念を融合させた新しい概念に基づく電磁界感応機能性人工媒質を提案してきた.この材料の一応用例として,電波吸収体を例にとり,3次元構造の単位セルを用いてその可変電波吸収特性について検討を重ねてきた.本報告では,本電波吸収体の斜入射整合特性が劣化するこという問題に対処するために,回路構成にインダクタンスを付加する手段を新たに導入し,TM波の入射角度45度の場合においても,垂直入射と同様に3.9[GHz]で-25[dB]以下の電波吸収特性が得られることについて述べる.さらに,電波吸収体の表面と奥行き方向にPINダイオードを装荷させ可変整合周波数特性を改善できることを明らかにしている. |
| (英) |
A new configuration of microwave absorber using metamaterial based on the concept of autonomous control system of living sell is described. This metamaterial is composed of an active or passive circuit in a three dimensional structure which is called a unit cell. The unit cells are arranged based on the Bravais crystal lattice clarification. As an application of autonomous control metamaterial (ACMM), a new microwave absorber has been proposed. In experiment, good matching characteristics below –30dB at 5.25GHz have been obtained in normal incidence. However, in grazing incidence, the matching characteristics particularly in the TM wave deteriorate and tend to move toward the low frequency region. To resolve this problem, inductance is integrated to the unit cell. Good matching characteristics below –25dB at 3.9GHz are obtained in oblique incidence at the angle of 45 degrees. Moreover, new configuration capable of changing matching frequency characteristic is clarified to mount the PIN diode on the surface of unit cells and the direction perpendicularly to them. |
| キーワード |
(和) |
人工媒質 / PINダイオード / 電波吸収体 / 可変周波数特性 / / / / |
| (英) |
Metamaterial / PIN Diode / EM-Wave Absorber / Changeable frequency characteristic / / / / |
| 文献情報 |
信学技報, vol. 106, no. 508, EMCJ2006-111, pp. 75-79, 2007年1月. |
| 資料番号 |
EMCJ2006-111 |
| 発行日 |
2007-01-19 (EMCJ) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMCJ2006-111 |