| 講演抄録/キーワード |
| 講演名 |
2007-05-25 14:50
PCBをノイズ源とした筐体まどからの電磁放射の検討 (その3) ○宮田翔吾・萓野良樹・井上 浩(秋田大) EMCJ2007-14 |
| 抄録 |
(和) |
電子機器からの不要電磁放射対策の一つとして,筐体を用いて電磁波を遮蔽する方法がある.しかしながら,筐体まど(開口部)から電磁波が漏洩し,要求するシールド効果が得られないことがある.本研究では,プリント回路基板(PCB)をノイズ源(電磁波放射源)として内蔵した筐体モデルを用い,筐体開口部からの電磁放射を明らかにすることを試みた.開口部寸法やPCB配置位置を変更して近傍磁界と遠方電界の周波数特性,シールド効果,また遠方電界指向性特性の測定を行い,開口部寸法およびPCBの配置位置が及ぼす影響について検討した.PCB配置位置を開口部近傍から中心方向に移動した結果,遠方電界の水平偏波では10dB程度シールド効果が向上した.このことから,筐体内部のノイズ源配置位置がシールド効果に対して大きく影響していることが明らかになった. |
| (英) |
Enclosure technique is widely used to suppress electromagnetic (EM) radiation and interference from electronic devices. As the aperture of the enclosure causes leakage of EM wave, desired shielding effectiveness may not be satisfied. In this paper, EM radiation from aperture of the enclosure is investigated by using the enclosure model which has a printed circuit board (PCB) as internal EM-noise source. Frequency responses of magnetic near and far-electric fields, shielding effectiveness (SE), and angle pattern at far-field and effects of the size of aperture and position of PCB are discussed. The position of PCB in the enclosure affected about 10dB of horizontal component of far-electrical field. It is suggested that the positioning of the noise source in the enclosure affects on the SE. |
| キーワード |
(和) |
電磁ノイズ / シールド効果 / 筐体 / 開口部 / 空洞共振 / / / |
| (英) |
EM-noise / Shielding Effectiveness / Enclosure / Aperture / Cavity Resonance / / / |
| 文献情報 |
信学技報, vol. 107, no. 68, EMCJ2007-14, pp. 23-28, 2007年5月. |
| 資料番号 |
EMCJ2007-14 |
| 発行日 |
2007-05-18 (EMCJ) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMCJ2007-14 |