| 講演抄録/キーワード |
| 講演名 |
2007-09-07 14:00
磁性金属/ポリイミド複合材料厚膜を用いたプレーナパワーインダクタの試作 ○清水勇人・柏木友喜・吉池政史・直江正幸・佐藤敏郎・三浦義正・山沢清人(信州大) EE2007-30 |
| 抄録 |
(和) |
Fe-Al-Si合金またはFe系アモルファス磁性金属微粒子がポリイミド中に分散した複合材料厚膜を用いて,プレーナパワーインダクタを作製した.本インダクタは厚さ1mmのNi-Zn-Cuフェライトを基板に銅スパイラルコイルを形成した後,スクリーン印刷による複合材料厚膜を積層することによって作製される.試作したインダクタは,10mm角,高さ1.4mm,130nH程度のインダクタンス,10Aの直流重畳電流におけるインダクタンスの低下は5%以下であった.試作インダクタを5V-1.5V・7A,1MHzのDC-DCコンバータに適用し,80%以上の変換効率を示すことを明らかにした. |
| (英) |
A planar power inductor with a metallic magnetic particle/polyimide composite thick film and a 1 mm thick Ni-Zn-Cu ferrite substrate has been fabricated and applied to a 1 MHz, 5V-1.5・7A DC-DC converter. Fe-Si-Al alloy and/or Fe based amorphous metallic magnetic particle was used for composite thick film. The fabricated inductor had a 1.4 mm in thickness, 10 mm in size, 130nH in inductance, a small degradation inductance of below 5% at 10A superimposed DC current. 5V-1.5V・7A DC-DC converter with a fabricated planar power inductor exhibited 80 % over in efficiency. |
| キーワード |
(和) |
複合材料 / Fe-Al-Si合金粒子 / Fe系アモルファス粒子 / プレーナインダクタ / DC-DCコンバータ / / / |
| (英) |
Composite material / Fe-Al-Si alloy / Fe-B-Si-Cr amorphous / planar inductor / DC-DC converter / / / |
| 文献情報 |
信学技報, vol. 107, no. 211, EE2007-30, pp. 13-18, 2007年9月. |
| 資料番号 |
EE2007-30 |
| 発行日 |
2007-08-31 (EE) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EE2007-30 |