講演抄録/キーワード |
講演名 |
2009-01-22 13:25
給電ケーブルのコイル形状化と損失性媒質との併用によるアンテナ入力インピーダンス測定 ○王 正行・荒川 敬・前田忠彦(立命館大) AP2008-167 |
抄録 |
(和) |
同軸ケーブルを用いてアンテナの測定を行う際に,測定結果に与える誤差の一因として,給電ケーブル上の漏れ電流が一般的に知られている.漏れ電流の抑圧を目的としてバランチョークを用いることやフェライトコアを装荷する方法が報告されているが,いずれも適応周波数が限定されるため,近年注目を集めているUWB 技術には課題が残る.本報告では,FDTD 法を用いてケーブル上の漏れ電流が測定結果に与える影響について,アンテナの重要なパラメータであるインピーダンス特性を指標として検討し評価した.また,漏れ電流を抑圧する目的でアンテナ素子の極近傍にあるケーブルの一部をコイル形状化し,さらに残りの部分を損失性媒質で覆う測定手法の効果を実験的に検討した. |
(英) |
In this report,the influence of the leakage current along the feeding cable used during the impedancemeasurement was examined by using FDTD method in terms of the impedance characteristic and the current distributionsalong the feeding cable. The leakage current suppression by the coil-shaped cable section placed in thevicinity of the antenna under test has been evaluated experimentally. Also, the combination use of the coil-shaped cable section andlossy medium that covers the feeding cable has been proposed and evaluated experimentally in order to improve the accuracies of wideband antenna measurements. |
キーワード |
(和) |
漏れ電流 / コイル形状化 / 損失性媒質 / FDTD法 / UWB / / / |
(英) |
Leakage Current / Coil-shaped Feeding cable / Lossy Medium / FDTD method / UWB / / / |
文献情報 |
信学技報, vol. 108, no. 386, AP2008-167, pp. 101-106, 2009年1月. |
資料番号 |
AP2008-167 |
発行日 |
2009-01-14 (AP) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
AP2008-167 |