講演抄録/キーワード |
講演名 |
2010-01-21 10:20
被覆付き光ファイバ心線の接続に関する考察 ○小山 良・中島和秀・高谷雅昭・関口俊彦・倉嶋利雄(NTT) OFT2009-62 |
抄録 |
(和) |
被覆付き光ファイバ心線を用いた接続では,光ファイバ心線を被覆の上から劈開切断し,なおかつ被覆の許容寸法誤差から生じる接続点でのファイバコア偏心を低減する必要がある.本稿では従来型光ファイバカッタを用いた被覆付き光ファイバ心線の劈開特性について実験を行い,刃圧の最適化により裸ファイバと同等の良好な劈開端面が得られることを明らかにする.また,押圧力を用いて接続部近傍の光ファイバ被覆を除去し,調心精度を向上する方法を検討した.押圧時の被覆付き光ファイバ心線の撓み幅を 2.3 mm 以下とすることで 6 N 以上の押圧力を発生し,接続部近傍の被覆除去が可能となることを示す. |
(英) |
A jointing of coated optical fiber can improve the handling properties. This requires cutting the fiber over its coating. Moreover, an alignment error should be reduced to overcome the additional core concentricity error which is introduced by the coating geometrical tolerance. In this paper, we experimentally investigate the relationship between the blade pressure of the conventional cutter and the end face condition of coated optical fiber, and reveal that the coated fiber is cleaved to the same mirror end surface as the bare fiber with an adjusted blade pressure. We also study on the technique which removes the fiber coating of the end with a pressure force to reduce the error of the core concentricity, and show that the shorter buckling space than 2.3 mm realizes the pressure force over 6 N which is enough large to remove the fiber coating. |
キーワード |
(和) |
光ファイバ接続 / 被覆付き光ファイバ心線 / 光ファイバ切断 / 光ファイバ調心 / / / / |
(英) |
Optical fiber jointing / Coated optical fiber / Optical fiber cutting / Optical fiber alignment / / / / |
文献情報 |
信学技報, vol. 109, no. 377, OFT2009-62, pp. 1-4, 2010年1月. |
資料番号 |
OFT2009-62 |
発行日 |
2010-01-14 (OFT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2009-62 |