| 講演抄録/キーワード |
| 講演名 |
2010-01-28 13:25
Au-NPsを用いた有機薄膜電極の作製とガス応答 ○山川邦彦・劉 傳軍・林 健司・都甲 潔(九大) MBE2009-82 |
| 抄録 |
(和) |
本研究は,匂いセンサ実現に向けたインピーダンス測定の可能な有機薄膜電極の作製を目的とする.匂いセンサ実現のためには匂い分子を選択的に吸着し認識する分子認識機能を持つ部位と,その情報を電気信号に変換するトランスデューサ部位が必要となる.トランスデューサ部位には導電性高分子であるP3HT(Poly(3-Hexylthiophene))を用い,できるだけ薄い導電層を作製した.将来的には匂い分子認識部位を修飾することで匂い分子を検出するセンサとなる.本研究では金のナノパーティクル(Au-NPs)を用いることによって導電層の抵抗値を下げ,薄く安定な電極の作製を可能にした.Au-NPsにはスパッタリングの初期段階における金の島状構造を利用した.作製した電極を用いて3種類のガスに対してガス応答を調べ,また電極表面をAFMで観察し,P3HT層を確認した. |
| (英) |
The study aims at fabrication a possible organic thin film electrode of the impedance measurement for the achievement of the odor sensor. The part that selectively recognizes the molecule and the transducer part that converts the information into an electric signal are necessary for the odor sensor. A thin electrically conductive layer is made by using P3HT (Poly(3-Hexylthiophene)) that is the conducting polymer for the transducer part, and the part that recognizes the molecule is additively modified on this transducer layer in the future. The resistance of the conductive layer was lowered by using Nano particle of Au (Au-NPs), and making a thin, steady electrode was enabled. The island structure of money of the sputtering at the early stage was used for Au-NPs. The gas response was examined by using the made electrode for three kinds of gases and the P3HT surface of the electrode was observed with AFM. |
| キーワード |
(和) |
匂いセンサ / ガスセンサ / Au-NPs / P3HT / / / / |
| (英) |
odor sensor / gas sensor / Au-NPs / P3HT / / / / |
| 文献情報 |
信学技報, vol. 109, no. 406, MBE2009-82, pp. 25-29, 2010年1月. |
| 資料番号 |
MBE2009-82 |
| 発行日 |
2010-01-21 (MBE) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
MBE2009-82 |