講演抄録/キーワード |
講演名 |
2010-03-05 14:00
電磁抑制材による近傍電磁界の抑制と侵襲性の検討 ○中尻 睦・大久保裕太・松本祐樹・中山英俊・春日貴志(長野高専) EMD2009-131 エレソ技報アーカイブへのリンク:EMD2009-131 |
抄録 |
(和) |
PCB近傍に配置した,電磁抑制材による近傍電磁界の抑制効果と侵襲性について明らかにすることを目的としている.電磁抑制材は,銅板,磁性体,銅板と磁性体を貼り合わせた複合電磁抑制材をPCB上に配置した.抑制効果と侵襲性は,実験とフェライトの複素透磁率を組み込んだシミュレーションによって行った.
シミュレーションにおいて,フェライトの複素透磁率を10~50まで変化させたところ,$\mu_r'$は抑制量に,$\mu_r''$はフェライトの端部の磁界分布に影響することが明らかとなった.100MHzでは,銅板単体よりもフェライトならびに複合材で大きな抑制効果が得られた.電磁抑制材を配置したことによる近傍電界$E_z$への影響を検討したところ,銅板のPCB側にフェライトを貼ることで,電界への影響を軽減出来る可能性が明らかとなった. |
(英) |
The purpose of this study is to make clear the suppression effect and invasiveness for the near electromagnetic field by the conductor or the magnetic material put on the PCB. The suppression effect and invasiveness by the copper plate, the ferrite plate and the composite material pasted the copper and ferrite plates together are discussed by the measurement and FDTD analysis implemented in the complex relative permeability. When the complex permeability $\mu_r'$ and $\mu_r''$ of the ferrite are varied from 10 to 50, the $\mu_r'$ is related to the suppression amount, and $\mu_r''$ is to magnetic field distribution above the edge of the ferrite plate. The suppression amount by the ferrite and composite suppression material at 100~MHz is larger than that of the copper. The invasiveness for the near electric field by the FDTD is calculated. As the ferrite plate is passed the copper plate turn the PCB, the influence for the near electric field can be decreased. |
キーワード |
(和) |
PCB / 電磁抑制材 / 近傍電磁界 / 抑制効果 / 侵襲性 / / / |
(英) |
PCB / EM suppression material / Near electromagnetic field / Suppression effect / Invasiveness / / / |
文献情報 |
信学技報, vol. 109, no. 452, EMD2009-131, pp. 17-20, 2010年3月. |
資料番号 |
EMD2009-131 |
発行日 |
2010-02-26 (EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2009-131 エレソ技報アーカイブへのリンク:EMD2009-131 |