講演抄録/キーワード |
講演名 |
2010-10-25 15:05
CO2レーザ照射による空孔径制御を用いたフォトニック結晶ファイバ光減衰器の作製 ○横田浩久・後田耕佑・井上直哉・今井 洋・佐々木 豊(茨城大) OFT2010-34 |
抄録 |
(和) |
CO_2レーザ光をフォトニック結晶ファイバ(PCF)に照射して加熱・溶融することで,PCFの空孔径を制御して,フォトニック結晶ファイバ(PCF)光減衰器を作製した.減衰器作製において,PCFを回転させながらレーザ光を照射することで,PCF断面内の空孔径を一様に制御することが可能となった.適切なパワーのレーザ光を照射することでPCFの空孔率を調整できることを実証し,空孔率を小さくするほど大きな減衰量が得られることを明らかにした.また,作製したPCF光減衰器は波長980nmから1550nmにおいて平坦な波長特性を示した. |
(英) |
Photonic crystal fiber (PCF) attenuators with air hole diameter control were fabricated by PCF fusion using CO_2 laser irradiation technique. The diameters of air holes in the PCF cross section could be equally controlled by the laser irradiation with PCF rotation. We demonstrated that the air hole diameter ratio to pitch could be adjusted with irradiated laser power. It was clarified that the larger attenuation could be obtained for the smaller air hole ratio to pitch. It was also clarified that the fabricated PCF attenuators exhibited good wavelength independent characteristics in the wavelength range from 980nm to 1550nm. |
キーワード |
(和) |
フォトニック結晶ファイバ / 光減衰器 / CO_2レーザ照射 / 空孔径制御 / / / / |
(英) |
Photonic crystal fiber / Optical attenuator / CO_2 laser irradiation / Air hole diameter control / / / / |
文献情報 |
信学技報, vol. 110, no. 248, OFT2010-34, pp. 29-32, 2010年10月. |
資料番号 |
OFT2010-34 |
発行日 |
2010-10-18 (OFT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2010-34 |