| 講演抄録/キーワード |
| 講演名 |
2010-12-17 10:50
アンテナ導体上の表面電流に着目した地中レーダ用ビバルディアンテナの設計と評価 ○林 直樹・佐藤源之(東北大) AP2010-122 |
| 抄録 |
(和) |
地中レーダシステムへの搭載を目的とし,antipodal型ビバルディアンテナの設計と評価を行なった.従来,ビバルディアンテナのアンテナ導体形状決定のためには定量的な指標が無い為,アンテナ導体部端面での電流の不要反射を避けることは難しく,放射効率の低下及び時間領域信号のタイムサイドローブ成分の増加に繋がっていた.本論文では,FDTD法によりアンテナ導体上の表面電流を可視化し,表面電流の不要反射を極力抑えるよう,アンテナ導体形状を決定した.結果として,従来型よりも反射係数(|S11|),時間領域信号のタイムサイドローブ成分を抑えることが出来た.アンテナサイズは250mm×200mm,反射係数(|S11|)は500MHz – 6GHzで-8dB以下,時間領域信号のタイムサイドローブ成分は主パルスと比較して-27dB以下である. |
| (英) |
Design and evaluation of an antipodal Vivaldi antenna to be mounted on Ground Penetrating Radar (GPR) system are reported. So far, there is no quantitative index for a designing of an antenna conductor of the Vivaldi antenna, so it is difficult to suppress undesirable reflection of a surface current along an edge of the antenna conductor. In this paper, we utilize Finite Difference Time Domain (FDTD) method to visualize the surface current along the antenna conductor, and determine the shape of the antenna conductor to minimize the undesirable reflection of the surface current. As a result, both of the return coefficient (|S11|) and a time sidelobe level could be suppressed compared to the conventional antennas. As for the new antipodal Vivaldi antenna, the antenna size is 250mm by 200mm, the return coefficient (|S11|) is below -8dB in a frequency range of 0.5 – 6GHz and the time sidelobe level is 27dB lower than a main pulse. |
| キーワード |
(和) |
地中レーダ / ビバルディアンテナ / FDTD法 / 表面電流 / / / / |
| (英) |
GPR / Vivaldi antenna / FDTD method / surface current / / / / |
| 文献情報 |
信学技報, vol. 110, no. 347, AP2010-122, pp. 25-30, 2010年12月. |
| 資料番号 |
AP2010-122 |
| 発行日 |
2010-12-10 (AP) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
AP2010-122 |