講演抄録/キーワード |
講演名 |
2013-07-26 15:00
ジグザグ型DMFCにおける流路形成による空気供給法 ○石掛純徹・谷内利明(東京理科大) EE2013-17 |
抄録 |
(和) |
近年、スマートフォンやノートPCのようなポータブル機器は高性能、多機能化により消費電力が増加し、高エネルギー密度の電池が要求されている。ダイレクトメタノール燃料電池(DMFC)は理論エネルギー密度がリチウムイオン電池の10倍以上と言われており、次世代のポータブル機器向けの電源として期待されている。DMFCのひとつにセパレータが不要で、量産化に適した構造としてジグザグ型DMFCが提案されている。ジグザグ型DMFCは、空気供給が不十分になり出力電圧の低下が生じる。本報告ではジグザグ型DMFCの出力向上を目的として、新たに空気流路を形成した供給法を提案しその特性について明らかにした。 |
(英) |
In recent years, the power consumption of portable devices such as smartphones and notebook PCs has been increasing. These devices thus require a high energy density power supply. Direct Methanol Fuel Cells (DMFCs), whose theoretical energy density is 10 or more times greater than that of current lithium ion batteries, are expected to become the future power sources for such devices. We have previously proposed a zigzag-type DMFC that is suitable for mass production, since it does not require complicated separators, unlike the conventional stack-type structure. However, the air supply becomes insufficient over time and the output decreases.
In the present study, we proposed a new air-supply method that creates an internal air flow channel within the cell and investigated the power output of the DMFC. |
キーワード |
(和) |
ダイレクトメタノール燃料電池 / ジグザグ型 / 空気供給 / 空気流路 / / / / |
(英) |
DMFC / Zigzag-type / Air supply / Air flow channel / / / / |
文献情報 |
信学技報, vol. 113, no. 155, EE2013-17, pp. 85-90, 2013年7月. |
資料番号 |
EE2013-17 |
発行日 |
2013-07-18 (EE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EE2013-17 |