| 講演抄録/キーワード |
| 講演名 |
2013-11-21 10:30
DC 印加によるミクサの2 次ひずみ補正システム ○藤原孝信・谷口英司(三菱電機) MW2013-133 |
| 抄録 |
(和) |
無線機の小型化・低コスト化にはダイレクトコンバージョン受信方式の採用が有効であるが,ミクサの2次ひずみによる耐干渉性能劣化という欠点がある[1].例えば400MHz帯900MHz帯の特定小電力無線では,急速に普及する900MHz/700MHz帯LTE (Long Term Evolution)からの干渉が問題となる.そこで我々は,ひずみ発生の主要因であるミクサのひずみ低減技術として,DC印加によるオフセットを利用した2次ひずみ補正システムを提案する.シミュレーションと試作チップによる実証実験の結果,ミクサのミスマッチによる2次ひずみ劣化が,提案するミクサ回路を用いた2次ひずみ補正システムで改善することを実証した |
| (英) |
The direct conversion receiver is attractive candidate in order to realize compact and low-cost radio receivers. But it is well known that the direct conversion mixer could produce unwanted 2nd order distortion and degrades the receiver's performance. For example, considering commonly used communication system using ISM band (400MHz/900MHz), emerging new communication such as LTE(Long Term Evolution) can be an interferes that could deteriorate the receiver's sensitivity. Hence it is important to suppress the 2nd order distortion in the direct conversion mixer. In this paper, we propose newly developed correction system for the 2nd order distortion. We fabricated the direct conversion mixer with 0.18um CMOS process and the correction system for the 2nd order distortion. The experimental results shows that proposed mixer and system can suppress the 2nd order distortion. |
| キーワード |
(和) |
ミクサ / 2次ひずみ / IP2 / ダイレクトコンバージョン受信機 / / / / |
| (英) |
Mixer / 2nd order distortion / 2nd order intercept point / Direct conversion receiver / / / / |
| 文献情報 |
信学技報, vol. 113, no. 307, MW2013-133, pp. 11-16, 2013年11月. |
| 資料番号 |
MW2013-133 |
| 発行日 |
2013-11-14 (MW) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
MW2013-133 |