講演抄録/キーワード |
講演名 |
2013-12-06 09:55
縦続接続ツイストペアケーブルの特性評価手法の一検討 ○新田真吾・梅原大祐・若杉耕一郎(京都工繊大)・坪内利康・高橋佳吾(オートネットワーク技研) CS2013-77 IE2013-88 |
抄録 |
(和) |
車載ネットワークは多数の短いケーブルを縦続接続することでネットワークの柔軟性を向上させることが
可能である.しかし,縦続接続はケーブルの伝送特性を劣化させ規格を満足しない恐れがあるため,簡易かつ高精度な
規格適合試験手法が求められる.本稿では,T 行列(scattering Transfer matrix) 及びF 行列(Fundamental matrix)
を用いたツイストペアケーブルにおける伝送特性の簡易な規格適合試験手法を提案する.提案方式とアナログミック
スドシグナル(Analog Mixed Signal, AMS) シミュレータによる結果を比較し,高精度な適合試験手法として有効であ
ることを示す.評価指標として,Sc1d1,Sc2d1,Sd2d1,LCL (Longitudinal Conversion Loss),LCTL (Longitudinal
Conversion Transfer Loss) 及びATT (ATTenuation) を用いる.提案手法は行列演算で実現できるため,シミュレー
タに比べて簡易である. |
(英) |
In-vehicle networks will be wired by cascading some short cables to enhance the
exibility. However,
cascaded cables may not be complied with the standard. Simple and high accuracy conformance test is expected
to evaluate the transmission characteristic of cascaded cables. In this manuscript, we propose conformance test
with scattering transfer matrix (T matrix) and fundamental matrix (F matrix) for cascaded twisted pair cables.
It is shown that the proposed method has high accuracy by comparing it with an analog mixed signal (AMS)
simulator. The evaluation is conducted with Sc1d1, Sc2d1, Sd2d1, longitudinal conversion loss (LCL), longitudinal
conversion transfer loss (LCTL) and attenuation (ATT) of evaluation harness. The proposed method will be simple
as compared with the simulator. |
キーワード |
(和) |
LCL / LCTL / ATT / S行列 / T行列 / F行列 / ツイストペアケーブル / |
(英) |
LCL / LCTL / ATT / S matrix / T matrix / F matrix / twisted pair cables / |
文献情報 |
信学技報, vol. 113, no. 339, CS2013-77, pp. 119-123, 2013年12月. |
資料番号 |
CS2013-77 |
発行日 |
2013-11-28 (CS, IE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
CS2013-77 IE2013-88 |
|