講演抄録/キーワード |
講演名 |
2014-05-30 14:45
導体上に実装可能なダブルループアンテナの給電回路の設計 ○黒田州人・須賀良介(青学大)・上野伴希(オフィスウワノ)・橋本 修(青学大) EST2014-9 エレソ技報アーカイブへのリンク:EST2014-9 |
抄録 |
(和) |
本稿では,マイクロストリップ線路で構成するダブルループアンテナ用の給電回路を設計した.まず,電磁界シミュレータによって給電回路を設計する際の目標とする特性を確認して,給電回路を設計して最適化を図った.設計した給電回路を有するダブルループアンテナは400 MHz 以上の帯域で-10 dB 以下の反射特性を有する.さらに,外側ループの結合線路の幅の調整によって,各ループアンテナの電流振幅を調整できることを示した.また,アンテナの試作実験を行い,測定値と解析値の誤差要因について検討し,試作の際にビアによって生じる上下基板間の空隙が誤差要因であることを確認した. |
(英) |
The feeding circuit constructed of microstrip line for a double loop antenna was proposed. First, the target characteristics of the double loop antenna were set by electromagnetic field simulator. Next, the feeding circuit is designed and optimized. The bandwidth of the reflection of -10 dB is 410 MHz around the operational frequency of 12.5 GHz. In addition, the current amplitude of each loop element is controlled by the width of the coupled line for the outer loop. The characteristics of the fabricated double loop antenna were measured and compared with those of the simulated results, and the differences between them was discussed. |
キーワード |
(和) |
マイクロストリップ給電回路 / ダブルループアンテナ / 単一指向性 / 磁界結合 / 電界結合 / 移動体静止衛星通信 / / |
(英) |
Microstrip feeding circuit / Double loop antenna / Unidirectional tilted beam / Magnetic coupling / Electric coupling / Mobile satellite communications / / |
文献情報 |
信学技報, vol. 114, no. 69, EST2014-9, pp. 47-51, 2014年5月. |
資料番号 |
EST2014-9 |
発行日 |
2014-05-23 (EST) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EST2014-9 エレソ技報アーカイブへのリンク:EST2014-9 |