講演抄録/キーワード |
講演名 |
2014-07-18 10:00
2次元フォトニック結晶T字型分岐回路のシミュレーションと電磁波伝搬の制御 ○加藤丈政・鎌田克洋・加藤紀樹・陳 春平・穴田哲夫(神奈川大)・武田重喜(アンテナ技研) MW2014-76 OPE2014-45 EST2014-37 MWP2014-34 エレソ技報アーカイブへのリンク:MW2014-76 OPE2014-45 EST2014-37 MWP2014-34 |
抄録 |
(和) |
次世代高度情報通信社会の実現に向けて,サブミリ波の本格的な利用のためには,電磁波発生を含めて超小型電磁波回路が必須である.本論文では金属/誘電体フォトニック結晶T字型分岐回路のシミュレーションによる設計とその波動伝搬特性(周波数特性と電磁界)を与える.更にT字型分岐回路の接合部に微小誘電体円柱の摂動を与えることにより,シリコン誘電体円柱による電磁波の引き込み現象を応用して,電磁波の伝搬を操作・制御し,機能回路の集積化の自由度を増すことができる. |
(英) |
With the increasing demand of the higher bandwidth for the next generation wireless communication system, the extension of the operating frequency of the communication system to the upper-millimeter wave or terahertz range of the electromagnetic spectrum will be inevitable. In this paper, the optimum design and the wave propagation characteristics of metal/dielectric photonic crystal T-shaped waveguide based on FDTD method are given. In order to design metallic PhC devices based on perfect conductor model and frequency dependent "Drude-model", the dispersion relations of photonic bandgap are firstly calculated by using the standard plane wave expansion method. Secondly, by adjusting the positions and radii of the metallic and dielectric rods with the square lattice, T-junction switching circuits are demonstrated. Choosing the proper diagonal-line position of a small perturbing rod in the T-junction can change the output channel. As was expected, the EM waves give rise to a “pull-in” phenomenon with a small dielectric perturbation rod resulting in a switching function. |
キーワード |
(和) |
テラヘルツ波 / フォトニック結晶 / バンドギャップ / T字型導波路 / ドルーデ・モデル / / / |
(英) |
Terahertz / Photonic crystal / Bandgap / T-shaped waveguide / Drude-model / / / |
文献情報 |
信学技報, vol. 114, no. 143, EST2014-37, pp. 169-174, 2014年7月. |
資料番号 |
EST2014-37 |
発行日 |
2014-07-10 (MW, OPE, EST, MWP) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2014-76 OPE2014-45 EST2014-37 MWP2014-34 エレソ技報アーカイブへのリンク:MW2014-76 OPE2014-45 EST2014-37 MWP2014-34 |