講演抄録/キーワード |
講演名 |
2015-05-25 15:25
Measurement of mechanical quality factors of polymers in flexural vibration for high power ultrasonic application ○Jiang Wu・Yosuke Mizuno・Marie Tabaru・Kentaro Nakamura(Tokyo Tech.) US2015-13 |
抄録 |
(和) |
大振幅たわみ振動状態のポリマー片持ち梁のQ値を、Q値の定義に基づいて測定する方法を検討した。振幅と周波数を変えながら、代表的なポリマー材料であるPOM、ABS、PPSのたわみ振動のQ値を測定した。振幅と周波数が高くなると、Q値は低下した。最大振動速度300 mm/s以下かつ周波数40 kHz以下であれば、PPSのQ値は約350であり、試した他のポリマー材料より高いことが分かった。PPSは高いQ値と低い密度、低いヤング率の性質をもつことから、高い振動速度が得られ、強力超音波デバイスの弾性体として利用できると考えられる。 |
(英) |
In this study, a method for measuring the mechanical quality factor (Q-factor) in flexural vibration at large vibration amplitude is proposed. Mechanical quality factors (Q factors) of some functional polymers under different driving frequencies and vibration velocities are measured. In this method, Q factor is calculated precisely from the vibration velocity distribution on a vibrating thin bar, being based on the original definition of Q factor, which is the ratio of the maximum reactive energy to the dissipated energy. The experimental results show that the Q factors of the polymers decrease as the driving frequency and the vibration velocity increase. The Q factor of polyphenylenesulfide (PPS) reached approximate 350 when the vibration velocity was smaller than 300 mm/s and the frequency was lower than 40 kHz, which is larger than other tested polymers. The experimental results imply that PPS is a potentially applicable material as elastomer for power ultrasonic devices. |
キーワード |
(和) |
Q値 / ポリマー / エネルギーフロー / リアクティブエネルギー / 消散エネルギー / / / |
(英) |
mechanical quality factor / polymer / energy flow / reactive energy / dissipated energy / / / |
文献情報 |
信学技報, vol. 115, no. 52, US2015-13, pp. 25-30, 2015年5月. |
資料番号 |
US2015-13 |
発行日 |
2015-05-18 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2015-13 |