| 講演抄録/キーワード |
| 講演名 |
2015-08-03 13:30
PMMA濃厚ブラシを用いたpH不感応デバイスの開発 清水一輝(豊橋技科大)・Baek Sungchul(京大)・太齋文博・○岩田達哉・石田 誠(豊橋技科大)・辻井敬亘(京大)・澤田和明(豊橋技科大) ED2015-47 |
| 抄録 |
(和) |
本紙では、pH計測システムにおいて溶液電位を固定する為の参照電極に変わる、PMMA濃厚ブラシを用いた溶液電位のみを計測できる溶液電位センサについて報告する。このデバイスはpHセンサ上に50 nm程度のPMMA濃厚ブラシ膜を形成した構造である。デバイスの特性を測定した結果、pHに対する感度は±1 mV/pH以下、且つ溶液電位に対する出力ゲインは約1.3倍であり、溶液電位にのみ応答するデバイスを実現することが出来た。これによって、参照電極に頼らない、より小型なpH計測システムを実現することが出来る |
| (英) |
This paper reports a pH measuring system that uses a sensor device that can measure only the electrolyte potential, as an alternative of a reference electrode for to fix the electrolyte potential. The device has a structure with a PMMA concentrated polymer brushes layer that has about 50nm thickness over the pH sensor. As a result of measuring of the device's characteristic, pH sensitivity is not exceeding ±1 mV/pH, and the electrolyte potential sensitivity is about 1.3 times. Therefore, the device can be confirmed to be possible using at smaller pH measuring system. |
| キーワード |
(和) |
pHセンサー / ISFET / REFET / / / / / |
| (英) |
pH sensor / ISFET / REFET / / / / / |
| 文献情報 |
信学技報, vol. 115, no. 170, ED2015-47, pp. 1-4, 2015年8月. |
| 資料番号 |
ED2015-47 |
| 発行日 |
2015-07-27 (ED) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
ED2015-47 |