講演抄録/キーワード |
講演名 |
2016-02-19 13:20
ナノマニピュレーターを用いたコネクタ接点における接触構造と接触抵抗変化の挙動解析 ○豊泉 隼・大沼雅則・近藤貴哉(矢崎部品)・森 喜久男(矢崎総業)・清水哲夫・川端澄子・渡 邉 騎通(産総研) R2015-65 EMD2015-93 エレソ技報アーカイブへのリンク:EMD2015-93 |
抄録 |
(和) |
コネクタの小型化を実現するために、スズめっきの低接触荷重での接触現象を理解することがより重要になってきている。スズめっきの接触構造と接触抵抗の関係を明確にするため、スズめっきを用いた研究は多く行われているが、接点界面の構造の複雑さがメカニズム解明を困難にしている。そこで、我々はスズ表面にある酸化膜の影響を表面化学の手法を用いてナノスケールでの実験及び観察を行った。我々の過去の研究より、ナノスケール観察の手法にて酸化スズのクラックからのスズの噴き出しを実験的に確認することができた。そこで今回はスズの噴き出し量と抵抗値の相関について解析をすすめた。その結果、接触抵抗は見かけの接触面積ではなく、スズの噴き出し面積の増加と電気電導性との相関が良いことが分かった。また、ナノマニピュレーター技術は基礎研究の物性評価に留まらず自動車に搭載することを目指したコネクタの研究にも有効であることが分かった。 |
(英) |
The indentation using tin oxide film which was deposited on tin substrate was executed by a tungsten probe whose curvature was about 5 micro meter in radius with a nano-manipulator in Scanning Electron Microscope. We measured contact resistance and the load force simultaneously, found cracks of tin oxide layer and tin penetration into the cracks and investigated in detail the correlation between indented surface morphology and electrical resistance characteristics with respect to load force by changing indentation depth. In case of 100 nm oxide film, abrupt electrical resistance decrease was observed by applying load force about 1.0x10-3N. The increase of tin penetration area on indented surface correlated with the abrupt electrical resistance decrease. This directly indicated that tin penetration into the cracks and tin appearances on the oxide surface were crucial phenomena for reliable electrical contact. Nano-manipulator used in this study was a powerful instrument for basic research of electrical contacts and realization of the miniaturized and lower load force connector. |
キーワード |
(和) |
電気接点 / ナノマニュピレータ / 走査型電子顕微鏡 / 収束イオンビーム / / / / |
(英) |
lectrical contact / nano-indentation manipulator / scanning electron microscope / focused ion beam / / / / |
文献情報 |
信学技報, vol. 115, no. 455, EMD2015-93, pp. 1-6, 2016年2月. |
資料番号 |
EMD2015-93 |
発行日 |
2016-02-12 (R, EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
R2015-65 EMD2015-93 エレソ技報アーカイブへのリンク:EMD2015-93 |