講演抄録/キーワード |
講演名 |
2017-03-03 13:05
電磁コンタクタの電極質量変化量への開離時アークの影響 ~ 電源電圧が最小アーク電圧以下の場合 ~ ○田中秀和・山中雄登・澤 孝一郎・吉田 清(日本工大) EMD2016-99 エレソ技報アーカイブへのリンク:EMD2016-99 |
抄録 |
(和) |
本研究では2対のAgとNi合金の接点を有する電磁コンタクタに対して、最小アーク電圧以下の電源電圧DC3Vを印加し、閉成時、または開離時のみに10,20,および30Aの閉成時電流を通電して10万回の連続開閉実験を行った。この回路条件と開閉動作が接触抵抗、アーク継続時間、アークエネルギー、および電極質量変化に与える影響を実験から明らかにした。電極の質量変化量は電子天秤と、3Dレーザ顕微鏡から求めた。その結果、最小アーク電圧以下においても、回路内のインダクタンスの影響によりアーク放電が発生することが分った。また、アーク継続時間は閉成電流が大きいほど長くなった。また、開離時での電極質量変化量は、2対の接点で大きな差が生じた。一方、閉成時は、コンタクタが閉じるときにバウンスが発生して、複数回のアーク放電が発生した。陽極側には局部的に窪みが生じ、陰極側には陽極の窪みに対応した突起が生じた。 |
(英) |
In this experiment, the electromagnetic contactor with two pairs of Ag and Ni alloy contacts was used. The source voltage was set to 3 V DC below the minimum arc voltage and the closed contacts current was set to 10, 20, and 30A. We examined the influence of this circuit condition and breaking / making operation on contact resistance, arc duration, arc energy, and electrode mass change. The amount of change in mass of the electrode was obtained from the electronic balance and the 3D laser microscope.
As a results, it was found that arc discharge occurs due to influence of the inductance in the circuit even under the minimum arc voltage. When source voltage was applied only breaking, the electrode mass change amount, the large difference in the two pairs of contacts had occurred. On the other hand, when voltage was applied only making, a dent locally occurred on the anode and protrusions occurred on the cathode. |
キーワード |
(和) |
電磁コンタクタ / 電気接点 / アーク継続時間 / 接触抵抗 / アーク放電 / 銅 / ニッケル / |
(英) |
Electromagnetic contactor / Electrical contact / Arc duration / Contact resistance / Arc discharge / Ag / Ni / |
文献情報 |
信学技報, vol. 116, no. 492, EMD2016-99, pp. 1-4, 2017年3月. |
資料番号 |
EMD2016-99 |
発行日 |
2017-02-24 (EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2016-99 エレソ技報アーカイブへのリンク:EMD2016-99 |