| 講演抄録/キーワード |
| 講演名 |
2017-10-04 15:40
体積磁気ホログラム用多層膜磁気記録媒体の検討 ○干場直樹・白樫 善・後藤太一・高木宏幸・中村雄一・林 攀梅・内田裕久・井上光輝(豊橋技科大) CPM2017-63 |
| 抄録 |
(和) |
我々は,磁性ガーネットを用いた書き換え可能な磁気ホログラムメモリの実用化を目指して研究を行ってきた.磁気媒体の回折効率向上が再生像の高品質化に不可欠であるが,磁気ホログラムは特性上,表層部付近において過剰に発生した熱の拡散により,記録された干渉縞情報が消失する可能性が指摘されていた.そこで,磁性記録媒体に透明熱拡散層を挿入した多層膜構造に着目し,膜厚の光学設計を行い,シミュレーションから,熱拡散の影響が抑制され回折効率が向上することを示した.ただし浮遊磁界強度の計算から,多層膜構造においては十分な磁化反転がされない可能性があることがわかり,実験でも高い回折効率が得られなかった.そこで記録時に磁気アシストを行うことで,浮遊磁界の低下を補い,回折効率が向上できることを示した. |
| (英) |
We have studied to realize rewritable magnetic hologram memory using magnetic garnet which is a stable material. Improvement of the diffraction efficiency of the magnetic medium is needed for improving the quality of the reconstructed image. However, it was pointed out that the recorded information in interference fringe was disappeared due to the diffusion of heat excessively generated near the surface layer of the magnetic medium. To avoid this effect of thermal diffusion, we proposed the multi-layered structure in which the transparent heat sink layers (HSL) were inserted in the magnetic medium. Based on the numerical simulation, the effect of thermal diffusion could be suppressed by the HSL medium, and the diffraction efficiency could be improved. However, since the strength of stray magnetic field may be decreased in the thin magnetic layers, the diffraction efficiency of HSL medium was lower than that of single layer medium. This small stray magnetic field was compensated by magnetic assist recording, and the diffraction efficiency higher than that of single layer film was obtained in HSL medium. |
| キーワード |
(和) |
磁気ホログラム / 熱磁気記録 / 磁性ガーネット / 多層膜 / / / / |
| (英) |
Magnetic hologram / Thermomagnetic recording / Magnetic garnet / Multilayered structure / / / / |
| 文献情報 |
信学技報, vol. 117, no. 224, CPM2017-63, pp. 19-24, 2017年10月. |
| 資料番号 |
CPM2017-63 |
| 発行日 |
2017-09-27 (CPM) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
CPM2017-63 |