講演抄録/キーワード |
講演名 |
2018-03-01 16:35
K0.45Na0.55NbO3系セラミックスの作製及びその特性 ○青木俊輔・番場教子(信州大) CPM2017-124 エレソ技報アーカイブへのリンク:CPM2017-124 |
抄録 |
(和) |
本研究では難焼結性のニオブ酸カリウムナトリウム(K0.45Na0.55NbO3)セラミックスにリチウム及びタンタルを固溶することで焼結性及び特性を改善した非鉛圧電セラミックスの作製を目指した。Aサイト(K0.45Na0.55)を0.035molのLi、Bサイト(Nb)をTa0.2molで置換固溶し、同組成の粉末で成形体を覆って1150℃で焼成した試料で圧電定数d33=175pC/Nが得られた。同組成の試料をKリッチなK0.5Na0.5NbO3の粉末で覆って焼成した試料の圧電定数d33=161pC/Nより高い値を得ることができた。試料の組成のみならず、焼成時の成形体を覆う粉末の組成を変えるだけで、試料の特性に違いが現れることが確認された。 |
(英) |
The purpose of this study is to improve the sinterability and properties of potassium sodium niobate (K0.45Na0.55NbO3) ceramics by solid solution of lithium and tantalum into K0.45Na0.55NbO3 ceramics. Piezoelectric constant d33 = 175 pC/N was obtained with (K0.45Na0.55)0.965Li0.035Nb0.8Ta0.2O3 ceramic covered with powder of the same composition and sintered at 1150°C. The piezoelectric constant was higher than d33 = 161 pC/N of (K0.45Na0.55)0.965Li0.035Nb0.8Ta0.2O3 ceramic covered with K0.5Na0.5NbO3 powder containing more K than the specimen. From these result, it was confirmed that not only the composition of the sample but also the composition of the powder covering the sample (green body) during sintering influences the property of the sample. |
キーワード |
(和) |
ニオブ酸カリウムナトリウムセラミックス / リチウム / タンタル / 固溶体 / / / / |
(英) |
Potassium Sodium Niobate Ceramics / Lithium / Tantalum / Solid Solution / / / / |
文献情報 |
信学技報, vol. 117, no. 461, CPM2017-124, pp. 33-36, 2018年3月. |
資料番号 |
CPM2017-124 |
発行日 |
2018-02-22 (CPM) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
CPM2017-124 エレソ技報アーカイブへのリンク:CPM2017-124 |