講演抄録/キーワード |
講演名 |
2018-11-20 10:05
2×2素子を放射単位とする並列給電導波管スロットアレーアンテナのスリット層装荷によるH面サイドローブ抑圧の設計 ○荒川遥香・入江寿憲・戸村 崇・広川二郎(東工大) AP2018-101 |
抄録 |
(和) |
本稿では,並列給電導波管スロットアレーアンテナにおいて2×2素子を放射単位とするテイラー分布励振により正面から30-40度方向に生じる25dB程度のH面サイドローブを,放射スロットアレーの上に空気とPTFE基板を介してスリット層を装荷し抑圧する.まず,放射スロットアレーとスリット層の間に任意の比誘電率をとれる発泡誘電体を仮定し,2×2素子サブアレーと2×8素子を解析し,適切な発泡誘電体の比誘電率と厚み,スリットの幅でサイドローブが抑圧できることを確認した.次に,設計した発泡誘電体をミリ波帯においても低損失なPTFE基板と空気の2層の厚みを適切に設計して置換し, 設計周波数において30-40度方向のサイドローブを23.7 dBから33.0 dBまで抑圧し,71.0-78.0 GHzにわたりスリット層によるサイドローブ抑圧効果を得た. |
(英) |
We have suppressed H-plane sidelobe level in the tilted directions around 30-40 degrees in Taylor radiation pattern by introducing a slit layer in the corporate-feed waveguide slot array antenna consisting of 2×2-element radiating units. We assume the foam dielectric which can be arbitrary relative permittivity between the radiating slot array and the slit layer. We confirm that the sidelobe level can be suppressed by the appropriate relative permittivity, the height of the foam dielectric and the width of the slit. We replace the designed foam dielectric with a PTFE substrate and an air layer by their appropriate heights. The sidelobe level in the tilted directions around 30-40 degrees are suppressed to 33.0 dB from 23.7 dB at the design frequency. |
キーワード |
(和) |
導波管スロットアレー / 並列給電 / テイラー分布 / スリット / / / / |
(英) |
waveguide slot array / corporate-feed / Taylor distribution / slit / / / / |
文献情報 |
信学技報, vol. 118, no. 310, AP2018-101, pp. 1-4, 2018年11月. |
資料番号 |
AP2018-101 |
発行日 |
2018-11-13 (AP) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
AP2018-101 |