講演抄録/キーワード |
講演名 |
2018-12-13 09:45
エアギャップ付きM-PhCによる点欠陥共振器のシミュレーションと測定 ○謝 成龍・陳 春平・張 沢君・穴田哲夫(神奈川大) MW2018-114 エレソ技報アーカイブへのリンク:MW2018-114 |
抄録 |
(和) |
本稿では,金属平行平板導波路内に周期的に配置した金属円柱の上面間にエアギャップを設けた金属フォトニック結晶(M-PhC)構造を提案し,エアギャップ付きM-PhCのバンド特性について考察する.さらにエアギャップ付きM-PhC構造に点欠陥を設けることで共振器として機能することを確認するため,エアギャップ付きM-PhCによる点欠陥共振器の3D電磁界解析を行うと共に,実際に作製・測定した.エアギャップの高さを調整するによって誘電体周期構造のフォトニック結晶のバンド特性と同様の電磁バンドギャップ特性を持つことを明らかにした.またエアギャップによってM-PhC点欠陥共振器の共振周波数を微細に制御できることを明らかにし,フィルタのような電磁波回路に対して設計の自由度を得ることができた. |
(英) |
A conventional metallic photonic crystal (M-PhC) structure is constructed by a periodic arrangement of metallic rods in dielectric material, sandwiched by parallel plate metals. In this paper, we propose the M-PhC structure inserted an air layer between the parallel plate metals and the metal cylinder rods, and report the calculated results of bandgap characteristics and plane wave propagation characteristics. Furthermore, the M-PhC point-defect-cavity (PDC) with air-gap was simulated by FDTD method and was experimental fabricated, while the resonant frequencies of the M-PhC PDC were measured to compare with the simulated results. From the simulation and measurement results, the resonant frequencies of the PDC are changed by adjusting the height of air-gap, which validates properties of the M-PhC PDC with air-gap. |
キーワード |
(和) |
金属フォトニック結晶 / バンドギャップ特性 / エアギャップ / 点欠陥共振器 / / / / |
(英) |
Metallic photonic crystal / Bandgap / Air-gap / Point-defect-cavity / / / / |
文献情報 |
信学技報, vol. 118, no. 361, MW2018-114, pp. 1-5, 2018年12月. |
資料番号 |
MW2018-114 |
発行日 |
2018-12-06 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2018-114 エレソ技報アーカイブへのリンク:MW2018-114 |