講演抄録/キーワード |
講演名 |
2019-01-24 13:40
3辺シームレス透明PM駆動有機ELディスプレイの作製 ○宮原奨平・沈 昌勲(九大)・石代 宏(コニカミノルタ)・服部励治(九大) EID2018-8 エレソ技報アーカイブへのリンク:EID2018-8 |
抄録 |
(和) |
液晶パネルはバックライトを除くと半透過であるため、透明ディスプレイになりうるが、非発光であるため限られた場所でしか使用できない。しかし、有機ELディスプレイ(OLED)は、カソード電極を透明にすれば十分に高い透過率が得られ、素子自体が発光するために、背景より明るく発光させれば明るい映像を提供することができる。また、窓は非常に多くの空間を有して存在し、そこに情報発信できる透明ディスプレイは非常に有効である。我々は、高精細ではないが、その代わりに、高い透過率と輝度をもつ透明OLEDの開発を目指している。これにより、非表示時は通常の窓として使え、表示時は視認性が高く照明として使えるぐらい明るく光る今までにないコンセプトのディスプレイが得られる。本研究においては、走査線数を多く求めないため、開口率やプロセス時間で優位なパッシブマトリックス(PM)駆動を採用し、3辺シームレスPMOLEDの製作を行った。 |
(英) |
Since the liquid crystal panel is semi-transparent except for the backlight, it can be a transparent display. but it can be used only in a limited place because of a non-light emitting display. On the other hand, organic light emitting display (OLED) has sufficiently high transmittance using transparent cathode electrodes. In addition, since the OLED emits light itself, a sufficient clear image can be provided if it emits light brighter than the background. In addition, since the window has a very large space in a room or a car, the transparent display is very effective as an information transimission device. Therefore, we aim at developing a transparent OLED with high transmittance and high brightness instead of high definition. Thus, a display with high brightness and high visibility can be obtained. It can normally be used as a window when it is off, and it can be used as a lighting device when it is on, which gives an unprecedented concept. In this study, the number of scanning lines is not so large that a passive-matrix (PM) driving which is advantageous in aperture ratio and process time is used and also we tried to make a three-side-seamless PMOLED. |
キーワード |
(和) |
有機EL / 透明ディスプレイ / 3辺シームレス / PM駆動 / / / / |
(英) |
OLED / Transparent display / three-side-seamless / Passive-Matrix Driving / / / / |
文献情報 |
信学技報, vol. 118, no. 422, EID2018-8, pp. 9-12, 2019年1月. |
資料番号 |
EID2018-8 |
発行日 |
2019-01-17 (EID) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EID2018-8 エレソ技報アーカイブへのリンク:EID2018-8 |