講演抄録/キーワード |
講演名 |
2019-10-23 10:50
微小高調波を用いた振動切削法の数値的検討 ○志藤広陸・加藤秀行(大分大)・軽部 周(大分高専)・高坂拓司(中京大) CAS2019-41 NLP2019-81 |
抄録 |
(和) |
振動切削法とは,工具を規則的に振動させながら切削を行う精密加工法である.この加工法は慣用切削に比べて良好な加工面が得られる.一方,この加工法は臨界切削速度と呼ばれる切削速度の上限が存在し,その上限を超えるとびびり振動が発生する.また,微小高調波を用いると異常振動が抑制される研究が行われている.本稿では,微小高調波を用いた振動切削法 (高調波振動切削法) について数値的に検討を行う.まず切削モデルを示し,運動方程式およびモデルの振る舞いについて記述する.次に切削速度を変化させた場合の工作物変位を求め,振動切削法と高調波振動切削法の比較を行う.最後に,振動切削法に対する高調波振動切削法の優位性を示す. |
(英) |
A vibration cutting method is a precision machining technique with the regularly vibrating tool.The method polishes the surface smoother than a conventional cutting.However, there is an upper limit of the cutting speed called the critical cutting speed above which, chattering vibration occurs.In addition, some studies can suppress abnormal vibrations show weak harmonics.In this paper, we numerically the effects of the application of the weak harmonics to the investigate vibration cutting method (harmonic superimposed vibration cutting method).First, we present a mathematical model of the vibration cutting and describe motion equation and behaviors.Next, by the obtained displacement of the workpiece from numerical simulations with and without the weak harmonics for several cutting speeds the vibration cutting method and the harmonic vibration cutting method are compared.Finally, it is shown that the harmonic superimposed vibration cutting method superior to the vibration cutting method. |
キーワード |
(和) |
振動切削法 / 臨界切削速度 / びびり振動 / 高調波振動切削法 / / / / |
(英) |
Vibration cutting method / Critical cutting speed / Chatter vibration / Harmonic superimposed vibration cutting method / / / / |
文献情報 |
信学技報, vol. 119, no. 238, NLP2019-81, pp. 89-93, 2019年10月. |
資料番号 |
NLP2019-81 |
発行日 |
2019-10-15 (CAS, NLP) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
CAS2019-41 NLP2019-81 |
|