講演抄録/キーワード |
講演名 |
2020-07-09 11:10
3次元モジュールFPMを用いた太陽光発電の特性 ○谷内利明・望月祐希(東京理科大) EE2020-6 |
抄録 |
(和) |
地球温暖化の抑制を見据えて太陽光発電の大量導入が計画されている.大量導入に当たっては,広範な面積を必要とする太陽光発電では,設置面積当たりの発電量を増大することが必要とされる.著者らは,先に太陽電池パネルを植物の葉序に倣って3次元に構成し,設置面積当たりの発電量を増大できるFPM (Fibonacci number photovoltaic module)を提案した.本論文は,このFPMをハニカム状に多数配置した発電樹林について,隣接FPMの影の影響も考慮したその発電特性を明かにする.また,発電樹林の発電特性を従来の平面型設置太陽光発電と比較し,その優位性を明らかにする. |
(英) |
Enormous volume introduction of photovoltaic (PV) generation has been promoted to mitigate global warming. In the introduction of PV system, which requires the broad area, it is necessary to increase the amount of the electric power generation per the installation area. The authors proposed three-dimensional Fibonacci number PV modules (FPMs), which are designed in part based on natural plant leaf arrangements (phyllotaxy), for increasing the amount of power generated per unit area. This paper describes the power generation characteristics of the power generation forests, used multiple honeycomb arrangement FPMs, by the simulation considering the shadows of next FPMs. The characteristics are compared with that of conventional planar configuration PV panels. |
キーワード |
(和) |
フィボナッチ数列 / 葉序 / 発電電力推定 / 投影法 / ハニカム配置 / / / |
(英) |
Fibonacci Number / Phyllotaxis / Electric Power Estimation / Projection Method / Honeycomb Arrangement / / / |
文献情報 |
信学技報, vol. 120, no. 92, EE2020-6, pp. 7-12, 2020年7月. |
資料番号 |
EE2020-6 |
発行日 |
2020-07-02 (EE) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EE2020-6 |