講演抄録/キーワード |
講演名 |
2021-09-10 09:30
Randomly Wired Convolutional Neural Network推論回路のFPGA実装とその性能改善について ○倉持亮佑・中原啓貴(東工大) RECONF2021-17 |
抄録 |
(和) |
畳み込みニューラルネットワーク (Convolutional Neural Network: CNN) は組み込みシステムやデータセンターなどで広く使用されており,画像を対象とするタスクにおいて高い認識精度を達成している.
特にストリーミングビデオに対する画像処理をデータセンターで運用する際には,高認識精度・低レイテンシが重要となる.
本研究ではランダムグラフを基に CNN モデルを構築する Randomly Wired Convolutional Neural Network (RWCNN) を対象とする推論回路を提案する.
RWCNNは直接の依存関係のない多数の畳み込み層で構成される特徴を持ち,提案回路では畳み込み層を効率的にパイプライン処理する.
各畳み込み層の処理時に複数の層の計算結果を入力として読み込む必要があるため,複数のHBM2 チャネルを用いて並列に計算結果へアクセスする.
また,各畳み込み層の処理順序を適切に制御することで,パイプライン実行効率を向上させる.さらに HBM2 へのメモリアクセスの衝突を防ぐために,衝突グラフに対する頂点彩色を行うことで,HBM2 チャネルへ畳み込み層の割当てを行う.
HBM2 を搭載するAlveo U50 FPGA 上に提案回路を実装し,性能測定を行った.
CPU, GPU における RWCNN の推論性能との比較を行い,それぞれに対して 12.6 倍,4.93 倍高い電力効率を達成することができた. |
(英) |
Convolutional neural networks (CNNs) are widely used for image processing tasks in both embedded systems and data centers.
In data centers, high accuracy and low latency are desired for various tasks such as image processing of streaming videos.
We propose an FPGA-based low-latency CNN inference for randomly wired convolutional neural networks (RWCNNs), whose layer structures are based on random graph models.
Because RWCNNs have several convolution layers that have no direct dependencies between them, our architecture can process them efficiently using a pipeline method.
At each layer, we need to use the calculation results of multiple layers as the input.
We use an FPGA with HBM2 to enable parallel access to the input data with multiple HBM2 channels.
We schedule the order of execution of the layers to improve the pipeline efficiency.
We build a conflict graph using the scheduling results.
Then, we allocate the calculation results of each layer to the HBM2 channels by coloring the graph.
We implemented the proposed architecture on the Alveo U50 FPGA.
We obtained 12.6 and 4.93 times better efficiency than CPU and GPU, respectively. |
キーワード |
(和) |
Deep Learning / CNN / FPGA / RWCNN / / / / |
(英) |
Deep Learning / CNN / FPGA / RWCNN / / / / |
文献情報 |
信学技報, vol. 121, no. 175, RECONF2021-17, pp. 1-6, 2021年9月. |
資料番号 |
RECONF2021-17 |
発行日 |
2021-09-03 (RECONF) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
査読に ついて |
本技術報告は査読を経ていない技術報告であり,推敲を加えられていずれかの場に発表されることがあります. |
PDFダウンロード |
RECONF2021-17 |