| 講演抄録/キーワード |
| 講演名 |
2023-05-18 14:45
放熱性を考慮した導波管8合成器 ○廣田明道・大島 毅・西原 淳・野々村博之・深沢 徹・稲沢良夫(三菱電機) MW2023-9 |
| 抄録 |
(和) |
導波管広壁面から同軸線路の中心導体を挿入しつつ、先端をオープンとした同軸線路-導波管変換器は、低損失に電力を伝送する際に用いられる。このような同軸線路-導波管変換器に大電力を入力した場合、導波管に挿入した同軸線路の中心導体の先端で熱が発生するが、この発生した熱が放熱できず、中心導体が高温となり焼損する可能性がある。そこで、本稿では導波管に挿入した同軸線路の中心導体の先端部分に1/4波長線路の一端を接続し、1/4波長線路のもう一端を壁面に接続することで放熱性を高めた、同軸線路-導波管2合成器について検討し、本変換器を4つ接続して構成した導波管8合成器についても検討したので報告する。提案する同軸線路-導波管2合成器について、電磁界解析シミュレータを用いて検討した結果、反射損失が20dB以上となる比帯域は34.8%と、従来の2合成器と同等な特性となることを確認した。また、本2合成器を用いた導波管8合成器について検討した結果、反射量が-20dB以下となる比帯域は24.4%と広帯域な特性となり、合成損も0.05dBと良好な特性となることを確認した。以上から、放熱性を高めつつ電気特性としても良好な特性が実現できる見込みであることを確認した。 |
| (英) |
A coaxial to waveguide transition is used when signals are transmitted with low loss. When a large power is input to the coaxial to waveguide transition, heat is generated at the tip of the central conductor of the coaxial line inserted in the waveguide. This generated heat cannot be dissipated and the central conductor can become hot and burn out. In this paper, we proposed a 2/8-way waveguide power combiner with a 1/4 wavelength line. The one end of the 1/4 wavelength line is connected to the tip of the central conductor of the coaxial line inserted in the waveguide, and the other end of the 1/4 wavelength line is connected to the wall surface to improve heat dissipation. A frequency band in which a return loss is 20dB or more is 34.8% in the proposed 2-way waveguide power combiner. A frequency band in which a return loss is 20dB or more is 24.4% in the proposed 8-way waveguide combiner. We have confirmed that the proposed power combier has the same characteristics as the conventional power combiner. |
| キーワード |
(和) |
導波管 / 同軸線路 / 変換器 / 放熱 / 電力合成器 / / / |
| (英) |
Waveguide / Coaxial line / Transition / Heat dissipation / Power Combiner / / / |
| 文献情報 |
信学技報, vol. 123, no. 35, MW2023-9, pp. 1-5, 2023年5月. |
| 資料番号 |
MW2023-9 |
| 発行日 |
2023-05-11 (MW) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
MW2023-9 |