| 講演抄録/キーワード |
| 講演名 |
2025-03-04 13:00
[招待講演]線形光サンプリングの光ファイバ評価及びLiDAR用途への応用 ○張 超・大澤京悟・泉本 彬・須山嵩大・伊藤文彦(島根大)・中村篤志・大野槙悟・戸毛邦弘(NTT) PN2024-79 |
| 抄録 |
(和) |
単一コアSMFの伝送容量の制限を克服するために、MCF/MMF/MM-MCFについて研究が行われている。伝送後の信号はMIMO処理により復調されるため、モード間群遅延差とコア間の結合強度がMIMOプロセッサの負荷を決定する。したがって、DSP設計および実装には、事前にモード間群遅延差を測定する必要がある。上述の伝送障害は、光ファイバのインパルス応答の測定によって評価することができる。本講演では、線形光サンプリングを用いたファイバインパルス応答の測定、ファイバ空間モードの2次元線形光サンプリングの研究成果について報告する。また、CW光参照方式を用いた線形光サンプリングを利用した最近のLiDAR研究についても取り上げる。このようなLiDARは、高精細な3Dインフラ検査への適用が期待されている。 |
| (英) |
To overcome limitation of transmission capacity of single-core SMFs, MCF, MMF, and MM-MCF have been studied intensively. Since the transmitted signals are demodulated through MIMO processing, the spatial mode dispersion and coupling strength between cores determine the load on the MIMO processor. Therefore, it is necessary to measure the spatial mode dispersion in advance for DSP design and implementation. The aforementioned transmission impairments can be evaluated by measurement of the impulse response of the fiber under test. This presentation will report on the measurement of fiber impulse response using linear optical sampling and the results of research on two-dimensional linear optical sampling of fiber spatial modes. Additionally, recent LiDAR research using linear optical sampling with a CW light reference method will be discussed. Such LiDAR is expected to be applicable to high-definition 3D infrastructure inspection. |
| キーワード |
(和) |
マルチコアファイバ / マルチモードファイバ / インパルス応答 / 線形光サンプリング / LiDAR / / / |
| (英) |
Multi-core fiber / Multi-mode fiber / Impulse response / Linear optical sampling / LiDAR / / / |
| 文献情報 |
信学技報, vol. 124, no. 395, PN2024-79, pp. 112-119, 2025年3月. |
| 資料番号 |
PN2024-79 |
| 発行日 |
2025-02-24 (PN) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
PN2024-79 |