| 講演抄録/キーワード |
| 講演名 |
2025-10-24 11:40
超軽量電波吸収体における誘電率と導電率の推定と設計への利用 ○鈴木 暖・日髙貴志夫(東北大)・来島恵梨子・上野智永(名大)・大里智樹(ソラマテリアル)・田中元志・髙橋翔太郎(秋田大)・阿加賽見・遠藤 恭・室賀 翔(東北大) EMCJ2025-59 MW2025-145 EST2025-72 |
| 抄録 |
(和) |
カーボンナノチューブ(CNT)を複合した電波吸収体の高性能化のため,設計目標を理論計算に基づいて求め,実材料の電磁特性(誘電率,導電率)と比較することにより,材料設計指針を提案する手法について検討した.まず,27.5-29.5 GHzにおいて吸収性能が10 dB以上,または15 dB以上となる5 mm厚の電波吸収体における電磁特性の範囲解を算出した.次に,CNTを複合した材料の電磁特性を推定し,当初算出した電磁特性の範囲解と比較した.その結果,材料の導電率を低減することにより吸収性能を向上できる可能性が得られた.このことを踏まえて,CNTの分散性を向上させた材料を試作し,目標の周波数帯域における吸収性能が向上することを確認した.以上より,本手法の妥当性を示した. |
| (英) |
We investigated a methodology for enhancing the performance of carbon nanotube (CNT) composite electromagnetic wave absorbers by deriving target values from theoretical analysis and comparing them with the materials’ permittivity and conductivity. First, we calculated the design space for the permittivity and conductivity of a 5 mm thick absorber achieving absorption performance above 10 dB or 15 dB in the frequency range of 27.5-29.5 GHz. Next, the electromagnetic properties of CNT-composite materials were estimated and compared against the design space. This result demonstrates that it is possible to enhance the absorption performance by reducing the materials’ conductivity. Furthermore, materials with improved CNT dispersibility were fabricated, and the absorption performance in the target frequency band was enhanced. Therefore, this result demonstrated the validity of the proposed approach. |
| キーワード |
(和) |
CNT / 複素誘電率 / 導電率 / 電波吸収体 / 材料設計指針 / / / |
| (英) |
CNT / Complex permittivity / Conductivity / Electromagnetic wave absorber / Material design guideline / / / |
| 文献情報 |
信学技報, vol. 125, no. 208, EMCJ2025-59, pp. 112-117, 2025年10月. |
| 資料番号 |
EMCJ2025-59 |
| 発行日 |
2025-10-16 (EMCJ, MW, EST) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMCJ2025-59 MW2025-145 EST2025-72 |