| 講演抄録/キーワード |
| 講演名 |
2026-05-15 13:55
せん断変形した人工磁気導体の反射特性の測定 ○小川佳亮・島崎仁司(京都工繊大) MW2026-18 |
| 抄録 |
(和) |
人工磁気導体(AMC)をウェアラブルデバイスへ応用するには,身体の動きに追従できるよう柔軟に変形可能であることが望ましい.そこで本研究では,せん断変形に対する AMC の反射特性変化を AMC 反射板を用いた実測により明らかにした.反射板を構成するユニットセルの寸法は 15 mm × 15 mm × 3 mm とし,誘電体基板には FR-4,周波数選択表面には田の字形構造を用いた.このユニットセルを 36 × 30 周期配列し,2種類の AMC 反射板を作製した.1つは変形を与えていない反射板,もう1つは 11° のせん断変形を与えた反射板である.これらの反射板の反射特性を測定,比較することで,せん断変形による特性変化を評価した.結果として,偏波変換,帯域幅の変化,および中心周波数のシフトが確認された. |
| (英) |
For the application of artificial magnetic conductors (AMCs) to wearable devices, it is desirable that they possess sufficient flexibility to conform to body movements. In this study, changes in the reflection characteristics of an AMC under shear deformation were experimentally investigated using AMC reflectors. The unit cells constituting the reflector had dimensions of 15 mm × 15 mm × 3 mm, and consisted of an FR-4 dielectric substrate with a frequency selective surface having a square ring with four inner square patches. These unit cells were periodically arranged in a 36 × 30 array to fabricate two types of AMC reflectors: one without deformation and the other subjected to a shear deformation of 11°. The reflection characteristics of these reflectors were measured and compared to evaluate the effects of shear deformation. The results confirmed changes in polarization conversion, bandwidth, and resonant frequency. |
| キーワード |
(和) |
メタサーフェス / 人工磁気導体 / マイクロ波 / せん断変形 / 偏波変換 / / / |
| (英) |
Metasurface / Artificial Magnetic Conductor / Microwave / Shear deformation / Polarization conversion / / / |
| 文献情報 |
信学技報, vol. 126, no. 24, MW2026-18, pp. 51-56, 2026年5月. |
| 資料番号 |
MW2026-18 |
| 発行日 |
2026-05-07 (MW) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
MW2026-18 |