After the end of presentation end on November 19, I hold the banquette
(fee system).
We will guide details of the banquette later.
|
Chair |
|
Ryo Nagase (NTT) |
Vice Chair |
|
Kiyoshi Yoshida (Nippon Inst. of Tech.) |
Secretary |
|
Makoto Hasegawa (Chitose Inst. of Science and Tech.), Junya Sekikawa (Shizuoka Univ.) |
Assistant |
|
Yasuhiro Hattori (Sumitomo Denso) |
|
Conference Date |
Thu, Nov 19, 2009 09:00 - 18:00
Fri, Nov 20, 2009 09:00 - 17:20 |
Topics |
IS-EMD2009 (9th International Session on Electro-Mechanical Devices) |
Conference Place |
Nippon Institute of Technology, Kanda Campus |
Address |
2-5 Jimbocho, Kanda, Chiyoda-ku, Tokyo 101-0051, JAPAN |
Transportation Guide |
2 min walk from Exit A1 or A6 of Jimbocho station (Tokyo Metro Hanzomon Line, Toei Mita Line, or Toei Shinjuku Line) http://mot.nit.ac.jp/english/submenu/access.html |
Contact Person |
Electrical & Electronics Eng. Kiyoshi Yoshida
+81-480-33-7668 |
Sponsors |
This conference is co-sponsored by Research and Engineering Society for Electromechanical Components and Contact Technology in Japan
|
Announcement |
After end of the conference on November 19, a banquet(fee) is held. We would like you to join us. |
Copyright and reproduction |
All rights are reserved and no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, without permission in writing from the publisher. Notwithstanding, instructors are permitted to photocopy isolated articles for noncommercial classroom use without fee. (License No.: 10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
Thu, Nov 19 Session1 09:00 - 10:30 |
|
09:00-09:10 |
Opening session ( 10 min. ) |
(1) |
09:10-09:30 |
Motion Studies of Cathode Roots in High Current Arcs using an Optical Fiber Array based Imaging System EMD2009-69 |
J W McBride, S M Sharkh (Univ. of Southampton.), K J Cross (Taicaan Research), S Y Kim (Hyundai Heavy Ind.) |
(2) |
09:30-09:50 |
A study on Length and Diameter of Bridge Related with Holder Heat Capacity EMD2009-70 |
Kazuaki Miyanaga, Yoshiki Kayano (Akita Univ.), Tasuku Takagi (Em. Prof. Tohoku Univ.), Hiroshi Inoue (Akita Univ.) |
(3) |
09:50-10:10 |
Experimental Result on Reducing the Resistance Due To Temperature Rise in Pd Contacts EMD2009-71 |
Hiroyuki Ishida, Shunsuke Sasaki (Tohoku Bunka Gakuen Univ.) |
|
10:10-10:30 |
Break ( 20 min. ) |
Thu, Nov 19 Session 2 10:30 - 13:20 |
(4) |
10:30-10:50 |
Constriction resistance analysis of multi-contact spots EMD2009-72 |
Shigeru Sawada, Terutaka Tamai (Mie Univ.), Yasuhiro Hattori (AutoNetworks Technologies), Kazuo Iida (Mie Univ.) |
(5) |
10:50-11:10 |
Study of the Main Factors Affecting the Potential Distribution for Porcelain Zinc Oxide Arresters EMD2009-73 |
Xingwen Li, Qian Wang, Mingzhe Rong, Yi Wu (Xi'an Jiaotong Univ.) |
(6) |
11:10-11:30 |
The Discrimination of Failure Mechanisms by Analyzing the Variations of Time Parameters for Relays EMD2009-74 |
Shujuan Wang, Qiong Yu, Guofu Zhai, Xiaochen Li (Harbin Inst. of Tech) |
(7) |
11:30-11:50 |
The mechanism of a detailed surface transformation of fretting corrosion EMD2009-75 |
Daiji Ito, Yosuke Miura, Yasushi Saitoh, Hirosaka Ikeda, Terutaka Tamai, Kazuo Iida (Mie Univ.), Yasuhiro Hattori (AutoNetwork technologies) |
|
11:50-13:20 |
Lunch Break ( 90 min. ) |
Thu, Nov 19 Session3 13:20 - 15:00 |
(8) |
13:20-13:40 |
Welding of Manganin and Copper sheets by Using Magnetic Pulse Welding (MPW) Technique EMD2009-76 |
Mehrdad Kashani, Tomokatsu Aizawa, Keigo Okagawa (Tokyo Metropolitan Coll. of Tech.), Yoshitaka Sugiyama (Yazaki Corp.) |
(9) |
13:40-14:00 |
Effect of Crosslink Agents on Alumina and Natural Rubber Composite Materials EMD2009-77 |
Nuchnapa Tangboriboon, Anchalee Banchong, Saranya Chaisakgreenon, Nahathai Sornprasarn (Kasetsart Univ.) |
(10) |
14:00-14:20 |
Analysis of arc characteristics in miniature circuit breaker EMD2009-78 |
Mingzhe Rong, Fei Yang, Yi Wu, Weizong Wang, Jin Guo (Xi'an Jiaotong Univ.) |
(11) |
14:20-14:40 |
Characteristics of Break Arcs Driven by Transverse Magnetic Field in a DC High-voltage Resistive Circuit EMD2009-79 |
Tomohiro Atsumi, Junya Sekikawa, Takayoshi Kubono (Shizuoka Univ.) |
|
14:40-15:00 |
Break ( 20 min. ) |
Thu, Nov 19 Session4 15:00 - 16:40 |
(12) |
15:00-15:20 |
Simulation and Experimental Research on Electric Automobile Horn EMD2009-80 |
Jifeng Guo, Guofu Zhai, Wanbin Ren, Wenying Yang (Harbin Inst. of Tech) |
(13) |
15:20-15:40 |
Analysis of electric contacts using an electric conductive cluster and an electric field effect cluster EMD2009-81 |
Noboru Wakatsuki, Masahiro Oikawa, Takayuki Kudo, Nobuo Takatsu (Ishinomaki Senshu Univ.) |
(14) |
15:40-16:00 |
Examination of Cluster Model for Metal Melting of Electric Contacts EMD2009-82 |
Masahiro Oikawa, Takayuki Kudo, Nobuo Takatsu, Noboru Wakatsuki (Ishinomaki Senshu Univ.) |
(15) |
16:00-16:20 |
Examination of cluster model of arc ignition at electric contacts EMD2009-83 |
Takayuki Kudo, Noboru Wakatsuki, Masahiro Oikawa, Nobuo Takatsu (Ishinomaki Senshu Univ.) |
|
16:20-16:40 |
Break ( 20 min. ) |
Thu, Nov 19 Session5 16:40 - 18:00 |
(16) |
16:40-17:00 |
Degradation Phenomenon of Electrical Contacts by Hammering Oscillating Mechanism
-- Modeling of the Oscillating Mechanism (VI) -- EMD2009-84 |
Shin-ichi Wada, Keiji Koshida, Taketo Sonoda, Saindaa Norovling, Mitsuo Kikuchi, Hiroaki Kubota (TMC System), Koichiro Sawa (Keio Univ.) |
(17) |
17:00-17:20 |
Degradation Phenomenon of Electrical Contacts by Hammering Oscillating Mechanism
-- Contact Resistance(VIII) -- EMD2009-85 |
Shin-ichi Wada, Taketo Sonoda, Keiji Koshida, Saindaa Norovling, Mitsuo Kikuchi, Hiroaki Kubota (TMC System), Koichiro Sawa (Keio Univ.) |
(18) |
17:20-17:40 |
Computerized test stand software for testing switching capacity of lighting circuit switches EMD2009-86 |
Piotr Borkowski, Krzysztof Gorecki (Technical Univ. of Lodz) |
(19) |
17:40-18:00 |
Research on Capacitive Divider with Symmetrical Low-Voltage Arms EMD2009-87 |
Xiaoshe Zhai, Yingsan Geng, Jianhua Wang, Yan Wang, Zhengxing Wang, Zhengxiang Song (Xi'an Jiaotong Univer.) |
Fri, Nov 20 Session6 09:00 - 10:40 |
(20) |
09:00-09:20 |
A fritting like R-U characteristics and brush current sharing unbalance phenomena in steel collector ring for turbine generator EMD2009-88 |
Shuhei Dounoura, Yasunori Suzuki, Makoto Takanezawa, Takahiro Ueno, Noboru Morita (Nippon Inst. of Tech.) |
(21) |
09:20-09:40 |
A Study on Wear of Carbon Flat Commutator and Brush of DC Motor for Automotive Fuel Pump EMD2009-89 |
Koichiro Sawa (Keio Univ.), Takahiro Ueno, Hidenori Tanaka (Nippon Inst. of Tech.) |
(22) |
09:40-10:00 |
Reliability Tolerance Design of Electromagnetic Relay Considering Paremeters Fluctuation EMD2009-90 |
Xuerong Ye, Huimin Liang, Jie Deng, Guofu Zhai (Harbin Inst. of Tech.) |
(23) |
10:00-10:20 |
A study on influence of surrounding atmosphere to gaseous phase transition in break arc EMD2009-91 |
Kiyoshi Yoshida, Koichiro Sawa (Nippon Inst. of Tech.) |
|
10:20-10:40 |
Break ( 20 min. ) |
Fri, Nov 20 Session7 10:40 - 13:10 |
(24) |
10:40-11:00 |
Analysis of Dynamic Characteristics of the Permanent Magnetic Actuator with Multi-bar Linkage EMD2009-92 |
Qian Wang, Xingwen Li, Degui Chen, Haoyong Song (Xi'an Jiaotong Univ) |
(25) |
11:00-11:20 |
Simulation of Pressure Rise in Arc Quenching Chamber of Molded Case Circuit Breaker During its Interruption Process EMD2009-93 |
Degui Chen, Xingwen Li, Zhipeng Li, Liang Ji (Xi'an Jiaotong Univ.) |
(26) |
11:20-11:40 |
Effect of Contact Point Distribution to the High-Frequency Impedance on a Coaxial Connector EMD2009-94 |
Yu-ichi Hayashi (Tohoku Univ.), Songping Wu, Jun Fan (Missouri Univ. of Sci. and Tech.), Takaaki Mizuki, Hideaki Sone (Tohoku Univ.) |
(27) |
11:40-12:00 |
Passive Intermodulation due to Distributed Nonlinearity in Mismatched Passive Circuits EMD2009-95 |
Daijiro Ishibashi, Nobuhiro Kuga, Kazuki Kumagai (Yokohama Nat'l Univ.) |
|
12:00-13:10 |
Lunch Break ( 70 min. ) |
Fri, Nov 20 Session8 13:10 - 14:50 |
(28) |
13:10-13:30 |
A Control Method for Improving Performance of Permanent Magnetic Actuators in Vacuum Circuit Breakers EMD2009-96 |
Zhenxing Wang, Peng Yan, Yingsan Geng, Xiaoshe Zhai, Li Yu (Xi'an Jiaotong Univ.) |
(29) |
13:30-13:50 |
A microprocessor control system for an automated stand for testing erosion of contacts designed for DC and AC contactors EMD2009-97 |
Piotr Borkowski, Artur Augustyniak (Technical Univ. of Lodz) |
(30) |
13:50-14:10 |
Arc Duration at Carbon Contacts Interrupting DC Current in an Inductive Circuit
-- Measurement and Calculation -- EMD2009-98 |
Keiichi Suhara (Tokyo Nat Coll. of Tech.) |
(31) |
14:10-14:30 |
Effects of Contact Materials on Rotational Motion of Break Arcs Driven by Radial Magnetic Field EMD2009-99 |
Junya Sekikawa, Takayoshi Kubono (Shizuoka Univ.) |
|
14:30-14:50 |
Break ( 20 min. ) |
Fri, Nov 20 Sesshin9 14:50 - 16:30 |
(32) |
14:50-15:10 |
Growth of oxide film on tin plated surface of connector contacts and it effect on contact resistance EMD2009-100 |
Yuya Nabeta, Yasushi Saitoh, Shigeru Sawada (Mie Univ.), Yasuhiro Hattori (ANTech), Terutaka Tamai (Mie Univ.) |
(33) |
15:10-15:30 |
Observation of Tin Plated Fretting Contacts using FIB-SEM EMD2009-101 |
Tetsuya Ito, Yoshiyuki Nomura, Yasuhiro Hattori (AutoNetworks Technologies) |
(34) |
15:30-15:50 |
Study on the Retrograde Motion of Arc under Tranverse Magnetic Field EMD2009-102 |
Zhai Guofu, Cui Xinglei, Zhou Xue (Harbin Inst. of Tech) |
(35) |
15:50-16:10 |
Current Fluctuation Measurement for Breaking Contact at Transient Period from Bridge to Arc EMD2009-103 |
Shingo Hanawa, Kazuaki Miyanaga, Yoshiki Kayano, Hiroshi Inoue (Akita Univ.) |
|
16:10-16:30 |
Break ( 20 min. ) |
Fri, Nov 20 Session10 16:30 - 17:20 |
(36) |
16:30-16:50 |
Research on Mechanical Fault Recognition of Circuit Breaker Based on SVM EMD2009-104 |
Mingzhe Rong, Dongyan Li, Xiaohua Wang, Ting Wang, Yi Wu (Xi'an Jiaotong Univ.) |
(37) |
16:50-17:10 |
Effect of Different Vent Configurations on the Interruption Process of Arc Chamber EMD2009-105 |
Degui Chen, Ruicheng Dai, Xingwen Li (Xi'an Jiaotong Univ.) |
|
17:10-17:20 |
Announcement from secretariat ( 10 min. ) |
Announcement for Speakers |
General Talk | Each speech will have 15 minutes for presentation and 5 minutes for discussion. |
Contact Address and Latest Schedule Information |
EMD |
Technical Committee on Electromechanical Devices (EMD) [Latest Schedule]
|
Contact Address |
Makoto Hasegawa(Chitose Inst. of Science and Technorogy)
TEL (0123)27-6059、FAX (0123)27-6059
E- : ![](/ken/images/new/1217ah.bmp) ![](/ken/images/new/1111xxeq.gif) ![](/ken/images/new/1217ag.bmp) ![](/ken/images/new/1217aw.bmp) p![](/ken/images/new/1217oh.bmp) n![](/ken/images/new/tod.gif) ![](/ken/images/new/ihc.gif) ![](/ken/images/new/ot.gif) ![](/ken/images/new/1111xxeq.gif) ![](/ken/images/new/pjca.gif)
Junya Sekikawa (Shizuoka Univ.)
TEL (053) 478-1618、FAX (053) 478-1618
E- : tj![](/ken/images/new/1111xxeq.gif) k ipc![](/ken/images/new/tod.gif) ![](/ken/images/new/1111awed.gif) ![](/ken/images/new/0507padd.gif) ![](/ken/images/new/0507qwcd.gif) ![](/ken/images/new/pjca.gif)
Yasuhiro Hattori(Sumitomo Wiring Systems, Ltd.)
TEL (059)382-8970、FAX (059)382-8591
E- : ![](/ken/images/new/1217ay.bmp) ![](/ken/images/new/1111ywew.gif) ![](/ken/images/new/1217ih.bmp) - t![](/ken/images/new/ot.gif) ![](/ken/images/new/1217ir.bmp) ![](/ken/images/new/ta.gif) ![](/ken/images/new/1217ag.bmp) ![](/ken/images/new/et.gif) sws |
Announcement |
Latest information will be presented on the homepage:
http://www.ieice.org/es/emd/ |
Last modified: 2009-10-30 05:11:21
|