Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380
[TOP] | [2006] | [2007] | [2008] | [2009] | [2010] | [2011] | [2012] | [Japanese] / [English]
EMD2007-69
Frequency Influencing of Fretting Corrosion of Tin Plated Contacts
○Yasushi Saitoh・Naoyuki Sato・Terutaka Tamai・Kazuo Iida（Mie Univ.）・Tetsuya Ito・Shigeru Sawada・Yasuhiro Hattori（AutoNetworks Technologies）
pp. 1 - 6
EMD2007-70
Microscopic Observation of Fretting Corrosion of Tin Plated Contacts
○Hirosaka Ikeda・Tetsuya Ito・Shigeru Sawada・Yasuhiro Hattori（AutoNetworks Technologies）・Yasushi Saitoh・Terutaka Tamai・Kazuo Iida（Mie Univ.）
pp. 7 - 12
EMD2007-71
Micro-structural Study of Fretting Contact caused by the difference of the tin plating thickness
○Tetsuya Ito・Shigeru Sawada・Yasuhiro Hattori（AutoNetworks Technologies）・Yasushi Saitoh・Terutaka Tamai・Kazuo Iida（Mie Univ.）
pp. 13 - 18
EMD2007-72
The Relationship between Contact Resistance and Frictional Coefficient under High Current Sliding Contact
○Takahiro Ueno・Kenichi Kadono・Shinji Yamaguchi・Noboru Morita（Nippon Inst. of Tech.）・Akio Tanaka（Oyama Nat'l College of Tech.）
pp. 19 - 24
EMD2007-73
Influence of Surface Finish Processing on Contact Voltage Drop of Sliding Contact
○Kenichi Kadono・Takahiro Ueno・Shinji Yamaguchi・Noboru Morita（Nippon Inst. of Tech.）・Akio Tanaka（Oyama Nat'l College of Tech.）
pp. 25 - 30
EMD2007-74
Brush Sliding Contact Voltage Deviation Analysis based on the Evaluation of Displacement Excited Vibration caused by the Collector Ring Profile Distortion
-- for Turbine Generators & Traction Motors --
○Makoto Takanezawa・Hiroyuki Yanagisawa・Takahiro Ueno・Noboru Morita（Nippon Inst. of Tech.）
pp. 31 - 35
EMD2007-75
Measurement of Current Noise up to GHz from Slowly Breaking AgSnO2 Contact with External Magnetic Field
○Hikaru Miura・Yoshiki Kayano・Kazuaki Miyanaga・Hiroshi Inoue（Akita Univ.）
pp. 37 - 42
EMD2007-76
Motion of Break Arcs Driven by External Magnetic Field in a DC42V Resistive Circuit
○Junya Sekikawa・Takayoshi Kubono（Shizuoka Univ.）
pp. 43 - 48
EMD2007-77
Breaking Contact Phenomena of Time-coordinated Non-arcing Relay
○Noboru Wakatsuki・Hiroshi Honma・Kazumasa Otomo（Ishinomaki Senshu Univ.）
pp. 49 - 53
EMD2007-78
Influence of source voltage on gaseous phase arc transition in Ag alloy contacts
-- Relation between damage in contact surface and voltage --
○Kiyoshi Yoshida（Nippon Inst. of Tech.）
pp. 55 - 60
EMD2007-79
An experimental study of influences of contact opening speeds on arcing behaviors of silver contacts
○Makoto Hasegawa（Chitose Inst. of Science and Tech.）
pp. 61 - 66
EMD2007-80
The Effect of Power Supply Voltage on Make & break Duration of Relays
○Li Zhenbiao・Zhang Huan（Huazhong Univ. of Science & Tech.）・Makoto Hasegawa（Chitose Inst. of Science and Tech.）
pp. 67 - 72
EMD2007-81
A Study of Contact Spots on Earthquake Disaster Prevention Relays
Yoshitada Watanabe・○Yuichi Hirakawa（Kogakuin Univ.）
pp. 73 - 76
EMD2007-82
Study on Arc of Electromagnetic Relay Contacts Opening a DC Low Current Resistive Circuit with a Constant Velocity
Guofu Zhai・○Xue Zhou（Harbin Inst. of Tech.）
pp. 77 - 82
EMD2007-83
Nonlinear vibration characteristics of beam structure in electromagnetic relay
○Wanbin Ren・Yinghua Chen・Guofu Zhai（Harbin Inst. of Tech.）
pp. 83 - 89
EMD2007-84
Galvanically Deposited Gold Layers for Switching Contacts in High Temperature Ambient
○Werner Johler（Tyco Electronics Logistics AG）
pp. 91 - 97
EMD2007-85
Electrorheology of Acrylic Rubber and Lead Zirconate Titanate
○N. Tangboriboon（Kasetsart Univ.）・A. Sirivat・S. Wongkasemjit（Chulalongkorn Univ.）
pp. 99 - 102
EMD2007-86
Degradation phenomenon of electrical contacts by hammering oscillating mechanism
-- Relation to sliding contact mechanism --
○Shin-ichi Wada・Taketo Sonoda・Hiroshi Amao・Yasuo Takahashi・Mitsuo Kikuchi・Hiroaki Kubota（TMC System）・Koichiro Sawa・Kei Koga・Ryo Nishioka（Keio Univ.）
pp. 103 - 108
EMD2007-87
Contact Resistance Characteristics of Complex Structure Contacts for Contaminated Printed Circuit Board in SO2 Environment
○Terutaka Tamai・Yasushi Saitoh（Mie Univ.）・Yasuhiro Hattori（AutoNetwork Technologies）
pp. 109 - 114
EMD2007-88
Frequency dependence of electrical nonlinear distortion by heat oscillation on a two dimensional metal bridge
○Isao Minowa（Tamagawa Univ.）
pp. 115 - 117
EMD2007-89
Effect of change in the time of charging voltage on spark discharge from a metal disk
○Hajime Tomita（National Inst. of Occupational Safety and Health）
pp. 119 - 124
EMD2007-90
A Method for Vibration Resistance Optimization of Irregular-shape Beam Structure Basing on FEM and SQP
Yinghua Chen・○Wanbin Ren・Guofu Zhai（Harbin Inst. of Tech.）
pp. 125 - 129
EMD2007-91
A Study on Heat Analysis for Breaking Contact with Low Velocity (Part 2)
-- Influence of Holder Structure on Temperature Rise of Electrode (Part 2) --
○Kazuaki Miyanaga・Yoshiki Kayano（Akita Univ.）・Tasuku Takagi（Em. Prof. Tohoku Univ.）・Hiroshi Inoue（Akita Univ.）
pp. 131 - 135
EMD2007-92
3-D Finite Element Analysis of Dynamic Characteristics of Twin-Type Relay Interfered by Uniform Constant Magnetic Field
Guofu Zhai・Wenying Yang・○Xue Zhou（Harbin Inst. of Tech.）
pp. 137 - 142
EMD2007-93
Simulation and Experimental Study of Arc Motion in a Low-Voltage Circuit Breaker Considering Wall Ablation
Qiang Ma・Mingzhe Rong（Xi'an Jiaotong Univ.）・Anthony B. Murphy（CSIRO Industrial Physics）・○Yi Wu・Tiejun Xu（Xi'an Jiaotong Univ.）・Fei Yang（CSIRO Industrial Physics）
pp. 143 - 148
EMD2007-94
Thermal Analysis of AC Contactor Using Thermal Network Finite Difference Analysis Method
○Chunping Niu・Degui Chen・Xingwen Li・Weixiong Tong・Yingsan Geng（Xi'an Jiaotong Univ.）
pp. 149 - 154
EMD2007-95
Simulation of SF6 arc characteristcs concerning different pressure boundary condition
Jian Zhang・Shenli Jia・Xingwen Li・○Zongqian Shi・Lijun Wang（Xi'an Jiaotong Univ.）
pp. 155 - 159
EMD2007-96
An Improved Method to Measure Current Density Distribution in the Root of a Moving Arc at the Cathode Surface
Tiejun Xu・Mingzhe Rong・Yi Wu・○Xiaohua Wang・Qiang Ma・Jianjun Yao（Xi'an Jiaotong Univ.）
pp. 161 - 164
EMD2007-97
Analysis and Optimization for AC Contactor with Feedback Controlled Magnet System
Yingyi Liu・Degui Chen・○Yingsan Geng・Chunping Niu・Liang Ji・Weixiong Tong（Xi'an Jiaotong Univ.）
pp. 165 - 170
EMD2007-98
Analysis and Optimization for the Operating Mechanism of Air Circuit Breaker
○Degui Chen・Liang Ji・Yunfeng Wang・Yingyi Liu（Xi’an Jiaotong Univ.）
pp. 171 - 175
EMD2007-99
The Influence of the Insulation Baffle of Iron Splitter Plates on Arc Behavior
○Xingwen Li・Degui Chen（Xi’an Jiaotong Univ.）・Yimin You（Xi'an High Voltage Apparatus Research Institute）・Qian Wang（Applied Materials China）
pp. 177 - 182
今後、次の点を修正する予定です。(1)欠けている表紙画像・奥付画像を補完いたします。(2)欠けている発行日の情報を補完いたします。
注： 本技術報告は査読を経ていない技術報告であり，推敲を加えられていずれかの場に発表されることがあります．