Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380
[TOP] | [2006] | [2007] | [2008] | [2009] | [2010] | [2011] | [2012] | [Japanese] / [English]
EMD2009-69
Motion Studies of Cathode Roots in High Current Arcs using an Optical Fiber Array based Imaging System
J W McBride, S M Sharkh (Univ. of Southampton.), K J Cross (Taicaan Research), S Y Kim (Hyundai Heavy Ind.)
pp. 1 - 4
EMD2009-70
A study on Length and Diameter of Bridge Related with Holder Heat Capacity
Kazuaki Miyanaga, Yoshiki Kayano (Akita Univ.), Tasuku Takagi (Em. Prof. Tohoku Univ.), Hiroshi Inoue (Akita Univ.)
pp. 5 - 8
EMD2009-71
Experimental Result on Reducing the Resistance Due To Temperature Rise in Pd Contacts
Hiroyuki Ishida, Shunsuke Sasaki (Tohoku Bunka Gakuen Univ.)
pp. 9 - 12
EMD2009-72
Constriction resistance analysis of multi-contact spots
Shigeru Sawada, Terutaka Tamai (Mie Univ.), Yasuhiro Hattori (AutoNetworks Technologies), Kazuo Iida (Mie Univ.)
pp. 13 - 16
EMD2009-73
Study of the Main Factors Affecting the Potential Distribution for Porcelain Zinc Oxide Arresters
Xingwen Li, Qian Wang, Mingzhe Rong, Yi Wu (Xi'an Jiaotong Univ.)
pp. 17 - 20
EMD2009-74
The Discrimination of Failure Mechanisms by Analyzing the Variations of Time Parameters for Relays
Shujuan Wang, Qiong Yu, Guofu Zhai, Xiaochen Li (Harbin Inst. of Tech)
pp. 21 - 24
EMD2009-75
The mechanism of a detailed surface transformation of fretting corrosion
Daiji Ito, Yosuke Miura, Yasushi Saitoh, Hirosaka Ikeda, Terutaka Tamai, Kazuo Iida (Mie Univ.), Yasuhiro Hattori (AutoNetwork technologies)
pp. 25 - 28
EMD2009-76
Welding of Manganin and Copper sheets by Using Magnetic Pulse Welding (MPW) Technique
Mehrdad Kashani, Tomokatsu Aizawa, Keigo Okagawa (Tokyo Metropolitan Coll. of Tech.), Yoshitaka Sugiyama (Yazaki Corp.)
pp. 29 - 31
EMD2009-77
Effect of Crosslink Agents on Alumina and Natural Rubber Composite Materials
Nuchnapa Tangboriboon, Anchalee Banchong, Saranya Chaisakgreenon, Nahathai Sornprasarn (Kasetsart Univ.)
pp. 33 - 36
EMD2009-78
Analysis of arc characteristics in miniature circuit breaker
Mingzhe Rong, Fei Yang, Yi Wu, Weizong Wang, Jin Guo (Xi'an Jiaotong Univ.)
pp. 37 - 40
EMD2009-79
Characteristics of Break Arcs Driven by Transverse Magnetic Field in a DC High-voltage Resistive Circuit
Tomohiro Atsumi, Junya Sekikawa, Takayoshi Kubono (Shizuoka Univ.)
pp. 41 - 44
EMD2009-80
Simulation and Experimental Research on Electric Automobile Horn
Jifeng Guo, Guofu Zhai, Wanbin Ren, Wenying Yang (Harbin Inst. of Tech)
pp. 45 - 48
EMD2009-81
Analysis of electric contacts using an electric conductive cluster and an electric field effect cluster
Noboru Wakatsuki, Masahiro Oikawa, Takayuki Kudo, Nobuo Takatsu (Ishinomaki Senshu Univ.)
pp. 49 - 54
EMD2009-82
Examination of Cluster Model for Metal Melting of Electric Contacts
Masahiro Oikawa, Takayuki Kudo, Nobuo Takatsu, Noboru Wakatsuki (Ishinomaki Senshu Univ.)
pp. 55 - 60
EMD2009-83
Examination of cluster model of arc ignition at electric contacts
Takayuki Kudo, Noboru Wakatsuki, Masahiro Oikawa, Nobuo Takatsu (Ishinomaki Senshu Univ.)
pp. 61 - 66
EMD2009-84
Degradation Phenomenon of Electrical Contacts by Hammering Oscillating Mechanism
-- Modeling of the Oscillating Mechanism (VI) --
Shin-ichi Wada, Keiji Koshida, Taketo Sonoda, Saindaa Norovling, Mitsuo Kikuchi, Hiroaki Kubota (TMC System), Koichiro Sawa (Keio Univ.)
pp. 67 - 70
EMD2009-85
Degradation Phenomenon of Electrical Contacts by Hammering Oscillating Mechanism
-- Contact Resistance(VIII) --
Shin-ichi Wada, Taketo Sonoda, Keiji Koshida, Saindaa Norovling, Mitsuo Kikuchi, Hiroaki Kubota (TMC System), Koichiro Sawa (Keio Univ.)
pp. 71 - 74
EMD2009-86
Computerized test stand software for testing switching capacity of lighting circuit switches
Piotr Borkowski, Krzysztof Gorecki (Technical Univ. of Lodz)
pp. 75 - 78
EMD2009-87
Research on Capacitive Divider with Symmetrical Low-Voltage Arms
Xiaoshe Zhai, Yingsan Geng, Jianhua Wang, Yan Wang, Zhengxing Wang, Zhengxiang Song (Xi'an Jiaotong Univer.)
pp. 79 - 82
EMD2009-88
A fritting like R-U characteristics and brush current sharing unbalance phenomena in steel collector ring for turbine generator
Shuhei Dounoura, Yasunori Suzuki, Makoto Takanezawa, Takahiro Ueno, Noboru Morita (Nippon Inst. of Tech.)
pp. 83 - 86
EMD2009-89
A Study on Wear of Carbon Flat Commutator and Brush of DC Motor for Automotive Fuel Pump
Koichiro Sawa (Keio Univ.), Takahiro Ueno, Hidenori Tanaka (Nippon Inst. of Tech.)
pp. 87 - 91
EMD2009-90
Reliability Tolerance Design of Electromagnetic Relay Considering Paremeters Fluctuation
Xuerong Ye, Huimin Liang, Jie Deng, Guofu Zhai (Harbin Inst. of Tech.)
pp. 93 - 96
EMD2009-91
A study on influence of surrounding atmosphere to gaseous phase transition in break arc
Kiyoshi Yoshida, Koichiro Sawa (Nippon Inst. of Tech.)
pp. 97 - 100
EMD2009-92
Analysis of Dynamic Characteristics of the Permanent Magnetic Actuator with Multi-bar Linkage
Qian Wang, Xingwen Li, Degui Chen, Haoyong Song (Xi'an Jiaotong Univ)
pp. 101 - 104
EMD2009-93
Simulation of Pressure Rise in Arc Quenching Chamber of Molded Case Circuit Breaker During its Interruption Process
Degui Chen, Xingwen Li, Zhipeng Li, Liang Ji (Xi'an Jiaotong Univ.)
pp. 105 - 108
EMD2009-94
Effect of Contact Point Distribution to the High-Frequency Impedance on a Coaxial Connector
Yu-ichi Hayashi (Tohoku Univ.), Songping Wu, Jun Fan (Missouri Univ. of Sci. and Tech.), Takaaki Mizuki, Hideaki Sone (Tohoku Univ.)
pp. 109 - 112
EMD2009-95
Passive Intermodulation due to Distributed Nonlinearity in Mismatched Passive Circuits
Daijiro Ishibashi, Nobuhiro Kuga, Kazuki Kumagai (Yokohama Nat'l Univ.)
pp. 113 - 116
EMD2009-96
A Control Method for Improving Performance of Permanent Magnetic Actuators in Vacuum Circuit Breakers
Zhenxing Wang, Peng Yan, Yingsan Geng, Xiaoshe Zhai, Li Yu (Xi'an Jiaotong Univ.)
pp. 117 - 120
EMD2009-97
A microprocessor control system for an automated stand for testing erosion of contacts designed for DC and AC contactors
Piotr Borkowski, Artur Augustyniak (Technical Univ. of Lodz)
pp. 121 - 124
EMD2009-98
Arc Duration at Carbon Contacts Interrupting DC Current in an Inductive Circuit
-- Measurement and Calculation --
Keiichi Suhara (Tokyo Nat Coll. of Tech.)
pp. 125 - 128
EMD2009-99
Effects of Contact Materials on Rotational Motion of Break Arcs Driven by Radial Magnetic Field
Junya Sekikawa, Takayoshi Kubono (Shizuoka Univ.)
pp. 129 - 132
EMD2009-100
Growth of oxide film on tin plated surface of connector contacts and it effect on contact resistance
Yuya Nabeta, Yasushi Saitoh, Shigeru Sawada (Mie Univ.), Yasuhiro Hattori (ANTech), Terutaka Tamai (Mie Univ.)
pp. 133 - 136
EMD2009-101
Observation of Tin Plated Fretting Contacts using FIB-SEM
Tetsuya Ito, Yoshiyuki Nomura, Yasuhiro Hattori (AutoNetworks Technologies)
pp. 137 - 140
EMD2009-102
Study on the Retrograde Motion of Arc under Tranverse Magnetic Field
Zhai Guofu, Cui Xinglei, Zhou Xue (Harbin Inst. of Tech)
pp. 141 - 144
EMD2009-103
Current Fluctuation Measurement for Breaking Contact at Transient Period from Bridge to Arc
Shingo Hanawa, Kazuaki Miyanaga, Yoshiki Kayano, Hiroshi Inoue (Akita Univ.)
pp. 145 - 148
EMD2009-104
Research on Mechanical Fault Recognition of Circuit Breaker Based on SVM
Mingzhe Rong, Dongyan Li, Xiaohua Wang, Ting Wang, Yi Wu (Xi'an Jiaotong Univ.)
pp. 149 - 152
EMD2009-105
Effect of Different Vent Configurations on the Interruption Process of Arc Chamber
Degui Chen, Ruicheng Dai, Xingwen Li (Xi'an Jiaotong Univ.)
pp. 153 - 156
Note: Each article is a technical report without peer review, and its polished version will be published elsewhere.