Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380
[TOP] | [2015] | [2016] | [2017] | [2018] | [2019] | [2020] | [2021] | [Japanese] / [English]
EMT2018-7
[Invited Talk]
Study on topology optimization of optical waveguide devices
Yasuhide Tsuji (Muroran Inst. Tech.)
pp. 1 - 6
EMT2018-8
[Invited Talk]
A Long-Range High-Resolution Distance Measurement SoC for Self-Driving LiDAR Systems
Akihide Sai, Kentaro Yoshioka (Toshiba), Hiroshi Kubota (Toshiba Electronic Devices & Storage), Satoshi Kondo, Tuan Thanh Ta, Hidenori Okuni (Toshiba), Katsuyuki Kimura, Yutaka Oota, Tomohiro Sugimoto, Daisuke Kurose, Hirotomo Ishii, Nobu Matsumoto (Toshiba Electronic Devices & Storage)
pp. 7 - 12
EMT2018-9
Study on polarization rotator based on square lattice photonic crystal fiber with double-hole unit
Zejun Zhang (Kanagawa Univ.), Yasuhide Tsuji (Muroran Inst. Tech.), Masashi Eguchi (Chitose Inst. Sci. Tech.), Chun-ping Chen (Kanagawa Univ.)
pp. 19 - 22
EMT2018-10
Analysis of Plasmonic Waveguide with Filter Characteristics
Ryo Ohnuma, Koichi Hirayama, Jun-ichiro Sugisaka, Takashi Yasui (Kitami Inst. Tech.)
pp. 23 - 26
EMT2018-11
90GHz-band Linear Cell Radar System for Runway Surveillance System and Radar Cross Section Simulation of Target
-- Advanced Wireless System with Radio over fiber and Millimeter-wave Technology --
Nobuhiko Shibagaki, Yousuke Sato, Kenichi Kasima (Hitachi Kokusai)
pp. 27 - 32
EMT2018-12
A Study on Topology Optimization of Plasmonic Waveguide Device Based on Sensitivity Analysis by Adjoint Variable Method
Akino Koda, Yasuhide Tsuji (Muroran Inst. Tech.)
pp. 33 - 37
EMT2018-13
Application of Stabilized Explicit Method to Isogeometric Analysis for 1-D Electromagnetic Analysis
Hayato Naojima, Tadatoshi Sekine (Shizuoka Univ.)
pp. 39 - 44
EMT2018-14
Time Response Analysis of Surface Plasmon using FDCFD method
-- Extension for 3D scenario --
Di Wu (Nihon Univ.), Takashi Yamaguchi (TIRI), Shinichiro Ohnuki (Nihon Univ.)
pp. 45 - 48
EMT2018-15
Evaluation of the Electric Field in Cerebellum by Different Electrode Conditions for ctDCS
Akihiro Asai, Jose Gomez-Tamez, Takahiro Ito, Akimasa Hirata (NITech)
pp. 49 - 52
EMT2018-16
Influence of Conductivity Anisotropy of Human Head Model on TMS Pain Thresholds Detection
Takashi Sakai, Jose Gomez-Tames, Takahiro Ito, Akimasa Hirata (NITech)
pp. 53 - 58
EMT2018-17
GPR Image Recognition by Transfer Learning with FDTD Simulation on Deep Learning
Jun Sonoda (NIT, Sendai), Tomoyuki Kimoto (NIT, Oita)
pp. 59 - 62
EMT2018-18
New Relativistic Electromagnetism and New Opinion about Half-Wave Dipole Antenna
Hideomi Takahashi (Kidokoro Labo)
pp. 63 - 68
EMT2018-19
Radar responses from a corroded metal rod in a concrete structure (II)
-- Modeling of corrosion distribution around a reinforcing bar --
Masahiko Nishimoto (Kumamoto Univ.), Yoshihiro Naka (Kyushu Univ. Health and Welfare), Rohman Budiman P. A. (Kumamoto Univ.)
pp. 69 - 72
EMT2018-20
A Study on Guided-Mode Analysis of Periodic Waveguides Based on Differential Theory
Koki Watanabe, Kamin Kangkarn (Fukuoka Inst. Technol.)
pp. 73 - 76
EMT2018-21
High precision infrared refractive index measurement using Nano-antenna
Hibiki Kagami, Tomohiro Amemiya, Keisuke Masuda, Nobuhiko Nishiyama, Shigehisa Arai (Tokyo Tech)
pp. 77 - 82
EMT2018-22
Link characteristics of analog radio over multi-mode fiber for SHF band signals with 100MHz bandwidth
Toshinori Suzuki, Takamitsu Aiba (YAZAKI Corp.), Atsushi Kanno, Naokatsu Yamamoto (NICT), Tetsuya Kawanishi (Waseda U.), Tomohiro Wakabayashi (YAZAKI Corp.)
pp. 83 - 87
EMT2018-23
Transmission of Superimposed High-Speed Digital and Analog Signals Based on Simple Radio over Multi-Mode Fibers
Takamitsu Aiba, Satoshi Tanaka (YAZAKI CORP.), Motoharu Matsuura (UEC), Tomohiro Wakabayashi (YAZAKI CORP.)
pp. 89 - 93
EMT2018-24
Core position analysis/control for fabricating polymer optical waveguides in the Mosquito method for low-loss light coupling
Yoshie Morimoto, Kumi Date, Takaaki Ishigure (Keio Univ.)
pp. 95 - 100
EMT2018-25
Evalution of analog RoF transmission system by Commercially available digital optical module with Multi-tone modulation
Akihiro Fujie, Hitomi Ono, Junya Nishioka, Eisuke Haraguchi, Toshiyuki Ando (MELCO)
pp. 101 - 104
EMT2018-26
Digital coherent optical components as applied to coherent Doppler lidar for wind sensing
Toshiyuki Ando, Eisuke Haraguchi, Akihiro Fujie, Hitomi Ono (MELCO)
pp. 105 - 108
EMT2018-27
Output power enhancement in photonic-based RF generation by optical pulse compression with a dispersion managed highly-nonlinear fiber
Reinhard Karembera, Takashi Yamaguchi, Hiroyuki Toda (Doshisha Univ.)
pp. 109 - 113
EMT2018-28
A Study on a Cartesian Feed Back Circuit with a Diode Linearizer and a FIR Filter
Hifumi Noto, Kenichi Tajima (Mitsubishi)
pp. 115 - 118
EMT2018-29
A 26-W X-band high efficiency GaN MMIC power amplifier with compact spurious suppression filters
Jun Kamioka, Eigo Kuwata, Kazuhiko Nakahara, Yoshitaka Kamo, Masatake Hangai, Shintaro Shinjo (Mitsubishi Electric)
pp. 119 - 124
EMT2018-30
A Ka-band GaN Large-Signal Model Considering Trap Effect on Non-linear Capacitance by Using Transient S-parameters Measurement
Yutaro Yamaguchi, Tomohiro Otsuka, Masatake Hangai, Shintaro Shinjo (Mitsubishi Electric Corp.), Toshiyuki Oishi (Saga Univ.)
pp. 125 - 130
EMT2018-31
Design of Narrowband Band-Pass Filters with Inductive Posts using Metallic Photonic Crystal Waveguide in Quasi-Millimeter-Wave Band
Totomasa Satou, Chenglong Xie, Chun-Ping Chen, Zhejun Zhang, Tetsuo Anada (Kanagawa Univ.)
pp. 131 - 136
EMT2018-32
A Formulation of Gain Margin and Required Power for Closed-Loop Active Load-Pull Systems
Kentaro Kawabe, Toshio Ishizaki (Ryukoku Univ.)
pp. 137 - 142
EMT2018-33
High-speed optical modulators based on epitaxially grown (Pb,La)(Zr,Ti)O3 (PLZT) thin films
Shunsuke Abe, Hideo Hara, Shin Masuda, Masayuki Kimishima (Advantest Labs.)
pp. 143 - 148
EMT2018-34
Low-Pass Filter with multiple attenuation poles using Stub loaded type Dumb-Bell-Shaped Defected Ground Structure
Tetsu Takahashi, Satoshi Ono, Koji Wada (UEC)
pp. 149 - 154
EMT2018-35
Parallel Microwave Analysis Based on Domain Decomposition Method
Amane Takei (UOM), Toshio Murayama (Sony GM&O), Hiroshi Kanayama (JWU), Shinobu Yoshimura (UT)
pp. 155 - 160
EMT2018-36
Quantitative evaluation of required distance between objects and absorbing boundaries in electromagnetic simulation for open space
Takuichi Hirano (Tokyo City Univ.)
pp. 161 - 164
EMT2018-37
A Study on Tapered Polarization Splitter Using Single Polarization EC-CHFs
Shingo Kawamura, Yasuhide Tsuji (Muroran Inst. Technol.)
pp. 165 - 169
EMT2018-38
Linewidth reduction in wavelength tunable laser using feedback control
Eisuke Haraguchi, Akihiro Fujie, Kiyotomo Hasegawa, Keita Mochizuki, Yuto Ueno, Toshiyuki Ando (MitsubishiElectric Corp.)
pp. 171 - 174
EMT2018-39
2.45 GHz ISM-Band 450W High Efficiency GaN Pallet Amplifier for Microwave Heating
Takumi Sugitani, Kazuhiro Iyomasa, Masatake Hangai, Yoshifumi Kawamura, Jun Nishihara, Shintaro Shinjo (Mitsubishi Electric Corp.)
pp. 175 - 178
EMT2018-40
Numerical Computation of Scattered Field by Circular Disk of Perfect Conductor using High Performance Computing
Takashi Kuroki, Toshihiko Shibazaki (Tokyo Metro. Col. of Ind. Tech.), Teruhiro Kinoshita (Tokyo Polytech. Univ.)
pp. 179 - 184
EMT2018-41
2-D Position Estimation of Plural Objects by Two Remote Antennas
Naruto Yonemoto, Akiko Kohmura, Shunichi Futatsumori, Kazuyuki Morioka, Naoki Kanada (ENRI/MPAT)
pp. 185 - 190
EMT2018-42
Development of body core temperature computation method with arterial and venous temperatures taken into account
Toshiki Kamiya, Jose Gomez-Tames, Sachiko Kodera, Akimasa Hirata (NITech)
pp. 191 - 196
EMT2018-43
Evaluation of Characteristics of Quadruple-Mode Resonator Filter for Mobile-Phone Base-Stations and Study on Multistage
Akihiro Tsubouchi, Toshio Ishizaki (Ryukoku Univ)
pp. 197 - 201
Note: Each article is a technical report without peer review, and its polished version will be published elsewhere.