Online edition: ISSN 2432-6380
[TOP] | [2018] | [2019] | [2020] | [2021] | [2022] | [2023] | [2024] | [Japanese] / [English]
EMCJ2024-92
Development of a Simplified Smartphone Model for Radiofrequency Dosimetry Based on Measured SAR Data
Erina Kawai (NICT/Chiba Univ.), Kazuyuki Saito (Chiba Univ./NICT), Masaharu Takahashi (Chiba Univ.), Tomoaki Nagaoka (NICT)
pp. 1 - 5
EMCJ2024-93
Basic study of absorbed power density measurement procedure using head phantom at 6 GHz -10 GHz
Yuto Shimizu, Tomoaki Nagaoka (NICT)
pp. 6 - 11
EMCJ2024-94
Signal Acquisition of Magnetic Nanoparticles Using Optically Pumped Magnetometer
-- Study on Comparison of Signal Strength in Liquid and Solid Phases --
Sota Sato, taue shuji (Kochi Univ Tech.), Sasayama Teruyoshi (Kyusyu Univ.)
pp. 12 - 16
EMCJ2024-95
Effect of electrode surface roughness on electromagnetic field radiation in the sphere gap ESD
Ken Kawamata, shinobu Ishigami (Tohoku Gakuin Univ.), Osamu Fujiwara (NIT)
pp. 17 - 22
EMCJ2024-96
A study on circuit simulation technique for ESD noise voltage induced in wearable biosensors
Yusuke Shimizu, Yusuke Yano, Jianqing Wang (NITech)
pp. 23 - 28
EMCJ2024-97
Design of a TEM Horn Antenna for EMC Measurements
Katsushige Harima (NICT), Takayuki Kubo (NoiseKen), Kaoru Gotoh (NICT), Takeshi Ishida (NoiseKen)
pp. 29 - 32
EMCJ2024-98
Improving the characteristics of bends in transmission lines
Akinori Nomoto, Shinichi Sasaki (Saga Univ)
pp. 33 - 38
EMCJ2024-99
Method for reducing noise radiation from power supply layers on printed wiring boards
-- Additive resistance by 3D printer --
Takuya Hashimoto, Shinichi Sasaki (Saga Univ.)
pp. 39 - 43
EMCJ2024-100
Investigation of Accuracy Improvement and Learning Time Reduction in Noise Attenuation Spectrum Prediction for EMI Filters Using ANN
Ryo Maekawa, Masaki Himuro, Kengo Iokibe, Yoshitaka Toyota (OU)
pp. 44 - 49
EMCJ2024-101
Effect of Grounding Conditions of DUT and Link-Partner of Automotive Ethernet 100BASE-T1 on BCI Test
Teppei Ikeda, Yusuke Yano, Kouji Ichikawa, Osami Wada, Jianqing Wang (NIT)
pp. 50 - 55
EMCJ2024-102
Soft error testing method for telecommunication systems using a compact accelerator-driven neutron source based on ITU-T international standards
Kimihiro Tajima, Osamu Aoki, Mitsuo Hattori, Takuya Hoshino, Ryuichi Kobayashi (NTT-AT)
pp. 56 - 59
Note: Each article is a technical report without peer review, and its polished version will be published elsewhere.