| 講演抄録/キーワード |
| 講演名 |
2018-03-01 16:50
曲面上磁気光学イメージングのための磁気光学材料および磁気光学センサの開発に関する基礎検討 ○西本光佑(鈴鹿高専)・高木宏幸・後藤太一・中村雄一・リム パンボイ・内田裕久・井上光輝(豊橋技科大)・橋本良介(鈴鹿高専) CPM2017-125 |
| 抄録 |
(和) |
日常の安全性を維持するためには,欠陥を検査する非破壊検査が重要である.中でも磁気光学イメージングは高空間分解能で欠陥が2次元的に可視化することができる有用な非破壊検査手法の1つである.欠陥上に磁気光学膜をセンサとして配置することで,磁気光学効果で漏洩磁界を検出できる.しかし,先行研究ではセンサが曲面に対応できず,平面の検査のみに留まっていた.そこで我々は,曲面上非破壊検査を可能にするためのフレキシブルなセンサの開発を行っている.本研究では,フレキシブルセンサ上へのセンサの形成とセンサの材料となる磁性ガーネット粒子の作製に関する基礎的検討を行った.ポリビニルアルコールを有機バインダとして,既存の磁性ガーネット粒子と質量比率が1:1になるように混合した溶液をスピンコータで基板上に塗布することで,フレキシブル基板上にセンサを形成した.また,共沈法を利用して磁性ガーネット粒子の材料である硝酸化合物を作製した.本発表では,これらの実験結果をまとめて報告する. |
| (英) |
Non-destructive testing is an important technology to keep safety of our daily life. Magneto-optical imaging is a useful non-destructive testing method that can visualize defect two-dimensionally with high spatial resolution. By placing a magnetic garnet film as a sensor on a defect, a leakage magnetic field is detected via magneto-optical effect. However, in our previous study, a sensor was not able to deal with the curved surface of measuring objects, i.e. the testing was limited to the flat surface of that. Therefore, we developed a flexible magneto-optical sensor to enable non-destructive testing on curved surfaces. In this study, we deposited magnetic garnet particles on a flexible substrate. The particles corted on a plastic film using by spin-on process. Additionally, to control the chemical composition of the particls, the magnetic garnet particles were prepared using by the coprecipitation process. In this presentation, we will present experimental results of these fundamental study. |
| キーワード |
(和) |
磁気光学効果 / 磁気光学イメージング / 磁性ガーネット / 磁性フォトニック結晶 / / / / |
| (英) |
Magneto-optifcal effect / Magneto-optical imaging / Magnetic garnet / Magnetophotonic crystal / / / / |
| 文献情報 |
信学技報, vol. 117, no. 461, CPM2017-125, pp. 37-38, 2018年3月. |
| 資料番号 |
CPM2017-125 |
| 発行日 |
2018-02-22 (CPM) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
CPM2017-125 |