Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
MRIS, ITE-MMS |
2023-12-07 13:55 |
Ehime |
Ehime Univ. (CITE) (Primary: On-site, Secondary: Online) |
Effect of Curie temperature distributions in heat-assisted magnetic recording Simon Greaves (Tohoku Univ.), Yasushi Kanai (Niigata Inst. Technology) MRIS2023-23 |
The results of simulations of the effect of Curie temperature distributions among recording medium grains are presented.... [more] |
MRIS2023-23 pp.7-11 |
MRIS, ITE-MMS |
2023-12-07 14:45 |
Ehime |
Ehime Univ. (CITE) (Primary: On-site, Secondary: Online) |
Thermal Distributions of Recording Layers for in 3D Heat-assisted Magnetic Recording Koya Maeda, Fumiko Akagi (Kogakuin Univ) MRIS2023-25 |
In a 3D heat assisted magnetic recording method using a double-layer bit patterned medium (BPM), we investigated the rel... [more] |
MRIS2023-25 pp.18-23 |
ED |
2023-12-08 09:00 |
Aichi |
WINC AICHI |
Characterization of Self-joule heating assisted field emission source Rikuto Oda, Yoichiro Neo, Jonghyun Moon (Shizuoka Univ.) ED2023-46 |
In general, field emission shows the emission current from several ten nA to μA, however, there is a need for a high-bri... [more] |
ED2023-46 pp.31-34 |
MRIS, ITE-MMS |
2023-06-08 13:30 |
Miyagi |
Tohoku Univ. (RIEC) (Primary: On-site, Secondary: Online) |
Three dimensional heat-assisted magnetic recording Simon Greaves (Tohoku Univ.), Yasushi Kanai (Niigata Inst. Tech.) MRIS2023-1 |
This paper reports on the modelling of three dimensional recording media, with the aim of achieving an areal recording d... [more] |
MRIS2023-1 pp.1-6 |
MRIS, ITE-MMS |
2022-06-09 15:25 |
Miyagi |
RIEC, Tohoku Univ. (Primary: On-site, Secondary: Online) |
Degree of order and perpendicular magnetic anisotropy energy for FePt granular film with structural inhomogeneity in film thickness direction Daiki Isurugi, Takashi Saito (Tohoku Univ.), Kim Kong Tham, Ryosuke Kushibiki (TANAKA KIKINZOKU KOGYO K. K.), Tomoyuki Ogawa, Shin Saito (Tohoku Univ.) MRIS2022-4 |
Dependence of the degree of order and perpendicular magnetic anisotropy (Ku⊥) on magnetic layer thickness (dmag) for FeP... [more] |
MRIS2022-4 pp.19-23 |
MRIS, ITE-MMS |
2021-06-10 13:30 |
Miyagi |
RIEC, Tohoku U. (Primary: On-site, Secondary: Online) |
Effect of Dot Volume on Recording Performance in 3D HAMR Bit Patterned Media Hikaru Yamane, Simon John Greaves, Yoichiro Tanaka (Tohoku Univ.) MRIS2021-1 |
3D heat-assisted magnetic recording on bit patterned media with two recording structures was simulated. In this work, th... [more] |
MRIS2021-1 pp.1-6 |
MRIS, ITE-MMS |
2020-10-05 13:30 |
Online |
Online |
Structure and Magnetic Properties for L10 Typed FePt Granular Films with Various Grain Boundary Materials of Melting Point Takashi Saito (Tohoku Univ.), Kim Kong Tham, Ryosuke Kushibiki (TANAKA KIKINZOKU KOGYO K. K.), Tomoyuki Ogawa, Shin Saito (Tohoku Univ.) MRIS2020-1 |
The effect of the melting point (Tm) of various grain boundary materials on the structure and magnetic properties of FeP... [more] |
MRIS2020-1 pp.1-5 |
MRIS, ITE-MMS |
2019-07-19 16:10 |
Tokyo |
Kogakuin Univ. |
Relation between conditions of dots and areal recording density in HDMR Naofumi Matsushima, Fumiko Akagi (Kogakuin Univ.) MRIS2019-13 |
Heated dot magnetic recording (HDMR), which is a new recording method combining heat assisted magnetic recording (HAMR) ... [more] |
MRIS2019-13 pp.31-36 |
MRIS, ITE-MMS |
2019-06-13 16:00 |
Miyagi |
Tohoku Univ. |
Surface morphology of MgO/bcc-CrMn stacked underlayer and magnetic properties of FePt thin film stacked on the underlayer Takashi Saito, Akihiro Shimizu, Shin Saito (Tohoku Univ.) MRIS2019-6 |
In this study, we analyzed the surface morphology of MgO/bcc-CrMn stacked underlayer and magnetic properties of L10 type... [more] |
MRIS2019-6 pp.27-31 |
EE, WPT, IEE-SPC |
2018-07-03 15:00 |
Hokkaido |
Hokkaido University |
MPPT Mode Controlled Solar Battery Assisted Lunar Rover Wireless Power Transfer System with Constant Voltage Load Experiment Bingcheng Ji, Katsuhiro Hata, Takehiro Imura, Yoichi Hori (The Univ. of Tokyo), Shuuhei Shimada, Sayuri Honda, Osamu Kawasaki, Satoshi Ichikawa (JAXA) WPT2018-27 |
For conventional Lunar rover, the solar battery module is directedly connected to rover body through wire, and at lunar ... [more] |
WPT2018-27 pp.105-110 |
MRIS, ITE-MMS |
2017-06-09 09:15 |
Miyagi |
Tohoku Univ. |
FEM analysis of PMR write head for high data rate Yoshihisa Nakamura (Tohoku Univ.), Ryo Itagaki, Yasushi Kanai (Niigata Inst. Tech.) MR2017-6 |
A write head with a fast response and high efficiency is necessary to realize higher data rates and larger storage capac... [more] |
MR2017-6 pp.41-46 |
MRIS, ITE-MMS |
2014-10-03 11:25 |
Niigata |
Kashiwazaki energy hall, Niigata |
Anisotropy constant required for Heat Assisted Magnetic Recording Tadashi Kobayashi, Yosuke Isowaki, Yuji Fujiwara (Mie Univ.) MR2014-22 |
An anisotropy constant Ku required for thermally assisted magnetic recording (HAMR) was calculated. First, a heat transf... [more] |
MR2014-22 pp.51-56 |
MRIS, ITE-MMS |
2012-10-18 16:40 |
Akita |
AIT |
Development of local magnetic-optical Kerr effect measurement technology with laser heating Yuuki Nakamura (Akita Univ.), Yuji Kondo, Kiyoshi Yamakawa, Jun Ariake (AIT), Shunji Ishio (Akita Univ.) MR2012-23 |
For the realization of heat-assisted magnetic recording system with bit patterned medium, we are developing a new type m... [more] |
MR2012-23 pp.31-35 |
MRIS, ITE-MMS |
2012-03-16 15:45 |
Aichi |
Nagoya Univ. |
Heat analysis of recording head for thermally assisted magnetic recording Yoshito Ashizawa, Takeshi Ota, Katsuji Nakagawa (Nihon Univ.) MR2011-46 |
Thermally assisted magnetic recording is a key technology to achieve ultra-high recording density more than several $Tbi... [more] |
MR2011-46 pp.33-37 |
SCE, MW |
2010-04-23 15:55 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Characteristics of the rectangular TM110 resonator for the combinatorial chemistry Jun-ichi Sugiyama, Hiroki Shimizu (AIST), Hiromichi Odajima, Noriyuki Ohneda, Hiroki Mochizuki (Saida UMS Inc.), Tadashi Okamoto, Izuru Nagashima, Eijun Ohta (AIST) SCE2010-10 MW2010-10 |
In recent years, study of the microwave assisted chemical reaction becomes popular. To use for the combinatorial biochem... [more] |
SCE2010-10 MW2010-10 pp.51-56 |
ITE-MMS, MRIS |
2010-03-12 15:20 |
Aichi |
Nagoya Univ. |
Ultra thin FePt films with perpendicular magnetic anisotropy fabricated from Fe/Pt/X trilayers Yuji Ogata, Yasuharu Imai, Shigeki Nakagawa (Tokyo Inst. of Tech.) MR2009-63 |
L10-FePt ordered alloy thin films were fabricated by annealing Fe/Pt/X trilayers to control magnetic properties suitable... [more] |
MR2009-63 pp.27-31 |
MRIS, ITE-MMS |
2009-07-16 13:25 |
Tokyo |
Tokyo Inst. of Tech. |
Magnetic properties of FePtCu ordered alloy films fabricated from Cu/Pt/Fe trilayer Yuji Ogata, Yasuharu Imai, Shigeki Nakagawa (Tokyo Inst. of Tech.) MR2009-13 |
FePtCu ordered alloy films were fabricated from Cu/Pt/Fe trilayers in order to control their Curie temperature suitable ... [more] |
MR2009-13 pp.1-5 |