Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380
[TOP] | [2010] | [2011] | [2012] | [2013] | [2014] | [2015] | [2016] | [Japanese] / [English]
EMD2013-75
Contact corrosion of Ag-Mo electrical contact material
○Yusheng Cui・Yali Wang・Cao Ling・Lifu Hu（Metalor Technologies (Suzhou)）・Christine Bourda（Metalor Technologies France）・Chi Leung（Metalor Technologies Americas）
pp. 1 - 4
EMD2013-76
Influence of Different Microstructures on Electrical Behavior of The AgWC Contact Material
○Zhenyang Song・Xiufang Zhang・Xiaoping Bai・Wei Weng（Fuda Alloy Materials）
pp. 5 - 9
EMD2013-77
Simulation and analysis of temperature field and thermal stress of composite contacts in electrical life test of DC relay
○Wenying Yang・Dongyuan Li（Harbin Inst. of Tech.）・Zhuanke Chen（Chugai USA）・Guofu Zhai（Harbin Inst. of Tech.）
pp. 11 - 14
EMD2013-78
An Evaluating Method for Fundamental Dynamical Parameters of Objects on a Printed Circuit Board
-- Properties of the Responses using Rectangular Wave and Sinusoidal one as an Input --
○Shin-ichi Wada・Keiji Koshida・Hiroaki Kubota（TMC System）・Koichiro Sawa（Nippon Inst. of Tech.）
pp. 15 - 18
EMD2013-79
An Evaluating Method for Fundamental Dynamical Parameters of Objects on a Printed Circuit Board
-- Natural Frequency and Damping Ratio (2) --
○Shin-ichi Wada・Keiji Koshida・Hiroaki Kubota（TMC System）・Koichiro Sawa（Nippon Inst. of Tech.）
pp. 19 - 22
EMD2013-80
Synchronous Control System for Synthetic Test
○Jiang Yuan・Wu Jianwen・Wang Hefei（Beihang Univ.）
pp. 23 - 26
EMD2013-81
Analysis of the let-through current capability of PCB
○Shutong Hu・Feng Chong・Xingwen Li（Xi'an Jiaotong Univ.）・Chengzhang Han・Yongfa zhu（Huawei Technologies）
pp. 27 - 30
EMD2013-82
Investigation of Noise Interference due to Connector Contact Failure in a Coaxial Cable
○Yu-ichi Hayashi・Takaaki Mizuki・Hideaki Sone（Tohoku Univ.）
pp. 31 - 33
EMD2013-83
Study on the Breaking Characteristics of Low Voltage DC Circuit Breaker in the Low-current Situation
○Yunfeng Wang・Xingwen Li・Degui Chen（Xi'an Jiaotong Univ.）・Hongwu Liu・Ruiliang Guan（Changshu Switchgear MFG.）
pp. 35 - 38
EMD2013-84
Dynamic Simulation and Experiment on Electromagnetic Repulsion Mechanism for Hybrid DC Circuit Breaker
Lin Xin・○Cao Chen（Shenyang Univ. of Tech.）
pp. 39 - 42
EMD2013-85
Based On Intrinsic Mode Function Energy Tracking Method Of Circuit Breaker Vibration Signal Feature Extraction Studies
○Sun Yihang・Wu Jianwen（Beihang Univ.）
pp. 43 - 46
EMD2013-86
Multi-physics Coupling Simulation in the Design of Thermal Overload Relay
○Xun Shao・Weihua Wang・Xianping Yuan（Schneider Electric）
pp. 47 - 49
EMD2013-87
A novel method of bypass protection circuit for relay's arc-suppression
Xinjun Liu・Jing Wang・○Wenjia Zhang・Dongsheng Jiang（Beijing Inst. of Space System Engineering）
pp. 51 - 54
EMD2013-88
The study for contact life of spacecraft relay under inrush current affect
○Jiang Dongsheng・Zhang Pei・Liu Xinjun（Beijing Inst. of Space System Engineering）
pp. 55 - 58
EMD2013-89
Suppression of Arc Ignition for a DC Current Fuse Using a Transient Current Switched Circuit
○Daisuke Hara・Noboru Wakatsuki（Isinomaki Senshu Univ.）
pp. 59 - 62
EMD2013-90
Research on quartz sand fuse for pre-arcing time - current characteristics
○Zhang Hao・Hua Xin・Wang Jiao・Liu Zhiyuan・Yan Jing・Geng Yingsan（Xi'an Jiaotong Univ.）
pp. 63 - 66
EMD2013-91
Experimental study of SF6 and its gas mixtures with CF4 for a high voltage gas circuit breaker
○Kai Zhu（Xi'an Jiaotong Univ.）・Jianying Zhong（Henan Pinggao Electric）・Xingwen Li・Xu Jiang・Hu Zhao・Shenli Jia（Xi'an Jiaotong Univ.）
pp. 67 - 70
EMD2013-92
Arc Blowing for Slowly Breaking Different Shape Silver-Tin Dioxide Contacts by Arc Guide with External DC Magnetic Field
○Yoshiki Kayano（Akita Univ.）・Hiroshi Inoue（The Open Univ.）
pp. 71 - 74
EMD2013-93
Experimental Study on Arc Duration under Different Atmospheres
○Chen Li・Zhen-biao Li・Qian Wang・Du Liu（HUST）
pp. 75 - 78
EMD2013-94
Influence of Contact Opening Speed on Motion of Arc Spots on Contact Surfaces for Break Arcs occurring in a DC 450V Circuit
○Kojun Konishi・Junya Sekikawa（Shizuoka Univ.）
pp. 79 - 82
EMD2013-95
Research on the Influence of Contact gap on AC Arc Duration of Electromagnetic Relay
○Xuerong Ye・Zhao Han・Xinglei Cui・Huimin Liang・Guofu Zhai（Harbin Inst. of Tech.）
pp. 83 - 86
EMD2013-96
Kaolinite and Natural Rubber Composite Foams for Insulators Preparation
○Nuchnapa Tangboriboon・Surarit Samattai（Kasetsart Univ.）・Anuvat Sirivat（Chulalongkorn Univ.）
pp. 87 - 90
EMD2013-97
Influence of microstructure on static welding force of pure silver solid rivet contacts
○Heng Wang・Suhua Li・Guowei Li・Xiaoping Bai・Wei Weng・Liqiang Liu（Fuda Alloy Materials）
pp. 91 - 94
EMD2013-98
Effect of Different In Contents on Hardness and Microstructure of AgSnIn Alloy During Internal Oxidation
○Jie Li・Xiaofang Yan・Xiaoping Bai・Liqiang Liu・Suhua Li・Wei Weng（Fuda Alloy Materials）
pp. 95 - 98
EMD2013-99
A Study on Embedded F-SIR Type Transmission Line in IC Chip for Negative Group Delay
○Xiaofan Yang・Yoshiki Kayano（Akita Univ.）・Hiroshi Inoue（The Open Univ.）
pp. 99 - 102
EMD2013-100
Co-Simulation Technology of Intelligent Contactor
○Xu Zhihong・Tang Longfei（Fuzhou Univ.）
pp. 103 - 106
EMD2013-101
The Control Technology of Double Closed Loop and Self-correction for AC Contactors
○Tang Longfei・Xu Zhihong（Fuzhou Univ.）
pp. 107 - 110
EMD2013-102
Study on arc characteristics of a DC bridge-type contactor in air and nitrogen at different pressure
○Xue Zhou・Wenying Yang・Xinglei Cui・Guofu Zhai（Harbin Inst. of Tech.）
pp. 111 - 114
EMD2013-103
Research on Arcless Operation for AC Contactor
○Lianzhou Xu・Xili Wang・Zhiyong Wang・Yanli Liu・Fengyi Guo（Liaoning Technical Univ.）
pp. 115 - 118
EMD2013-104
Three-dimensional observation of damage shapes caused by break arcs on Ag and AgSnO2 contact surfaces
○Daichi Kawamura・Makoto Hasegawa（Chitose Inst. of Science & Tech.）
pp. 119 - 122
EMD2013-105
Time Variation of Contact Resistance after Contact of Silver Electrical Contacts
○Satoshi Ishikura・Junya Sekikawa（Shizuoka Univ.）
pp. 123 - 126
EMD2013-106
Observation of Cathode Surfaces Being Affected by a Break Arc
○Masato Nakamura・Junya Sekikawa（Shizuoka Univ.）
pp. 127 - 130
EMD2013-107
Experimental Investigation on the Role of Sphere Indenter in Measuring Contact Resistance of Flat Rivets
○Wanbin Ren・Yu Chen・Shengjun Xue（Harbin Inst. of Tech.）・Guenther Horn（ElConMat Consulting Associates）・Guofu Zhai（Harbin Inst. of Tech.）
pp. 131 - 134
EMD2013-108
Experimental study on root profile of molten bridge under different current at low opening speed
Xinyun Zhang・Xinglei Cui・○Xue Zhou・Guofu Zhai（Harbin Inst. of Tech.）
pp. 135 - 138
EMD2013-109
Simulation of Current Oscillation in HVDC MRTB
○Yang Li・Mingzhe Rong・Chunping Niu・Yi Wu・Hui Chen・Mei Li（Xi'an Jiaotong Univ.）
pp. 139 - 142
EMD2013-110
Influence of Fabrication Method on Arcing Erosion Behaviour of AgSnO2 Contact Materials
○Chunping Wu（Central South Univ.）・Wei Weng・Xiaoping Bai・Suhua Li・Danqing Yi（FuDa Alloy Materials）・Jiemin Zhou（Central South Univ.）
pp. 143 - 149
EMD2013-111
Effects of ZnO powder prepared by different methods on the properties of Ag/ZnO Electric Contact Materials
○Zhijun Wei・Lingjie Zhang・Qianhong Shen（Zhejiang Univ.）・Lawson Chen（Wenzhou Hongfeng Electrical Alloy）・Xianping Fan・Yang Hui（Zhejiang Univ.）
pp. 151 - 154
EMD2013-112
An experimental study on influences of contact opening speeds on break arc characteristics of Ag and AgSnO2 contacts
○Makoto Hasegawa（Chitose Inst. of Science & Tech.）
pp. 155 - 158
EMD2013-113
A review of theoretical models of dynamic welding of electrical contacts
○Adrian Sienicki・Piotr Borkowski（Lodz Univ. of Tech.）
pp. 159 - 161
EMD2013-114
Preparation of WC@SnO2Core-shell Composite and Its Application in AgSnO2Contact Material
○Qiu Jianmei・Shen Qianhong・Zhang Lingjie・Yang Hui（Zhejiang Univ.）・Fan Xianping（Wenzhou Hongfeng Electrical Alloy）・Chen Lesheng（Zhejiang Univ.）
pp. 163 - 166
EMD2013-115
Influence of Surrounding Gases on Thermodynamic and Transport Properties of Arc Plasma Occurring between Ag contacts
○Takuya Hara・Junya Sekikawa（Shizuoka Univ.）
pp. 167 - 170
EMD2013-116
Simulation Research on Physical Characteristics of Low-voltage Switching Arc Plasma Sheath in Air
○Wanying Liu・Guogang Zhang・Pengfei Zhang・Yingsan Geng（Xi'an Jiaotong Univ.）
pp. 171 - 174
EMD2013-117
Comparison of two methods to adjust the current setting value of the magnetic release in DC high speed circuit breaker
○Jianyu Qu・Qian Wang・Xingwen Li・Degui Chen（Xi'an Jiaotong Univ.）
pp. 175 - 178
EMD2013-118
Calculate Very Fast Transient Current by the Inverse Operation of the radiated transient electromagnetic field due to Switch Operation in Gas Insulated Switchgear
○Weifeng Xin・Guogang Zhang・Jianqiang Wang・Kai Liu・Yingsan Geng（Xi'an Jiaotong Univ.）
pp. 179 - 182
EMD2013-119
Effect of Ambient Temperature on the Contact Resistance of Sliding Contacts on a Silver Slip Ring and Silver Graphite Brush
○Mifuyu Fuchimoto・Koichiro Sawa・Takahiro Ueno（Nippon Inst. of Tech.）
pp. 183 - 186
EMD2013-120
Reconsideration of the Application of Silver Plating on Electrical Contacts in Signal Connectors
○Yilin Zhou・Shichao Ge・Chengming Yuan（Beijing Univ. of Posts and Telecommunications）
pp. 187 - 190
EMD2013-121
Analysis of Signal Characteristics of Faulty Connector in Communication Systems
○Rui Ji・Jinchun Gao・Gang Xie（Beijing Univ. of Posts and Telecommunications）・Chen Chen（Schlumberger）
pp. 191 - 194
EMD2013-122
Simulation of connector's vibration performance
○Lin Xue-Yan・Long Hui-Juan（Beijing Univ. of Posts and Telecommunications）
pp. 195 - 198
EMD2013-123
Erosion Rate of Carbon Contacts by Arc Discharge in Various Fuels
○Koichiro Sawa・Cheng Chan Wei・Takahiro Ueno（Nippon Inst. of Tech.）
pp. 199 - 202
EMD2013-124
The influence of magnetic and electric fields to the arc motion in low-voltage apparatus
○Hongwu Liu・Ruiliang Guan・Nairui Yin・Weiwen Lu（Changshu Switchgear Mfg.）
pp. 203 - 207
EMD2013-125
Thermal Analysis on Spring Contacts of High Voltage Apparatus
○Ruochen Qiang・Chunping Niu・Xiaohua Wang・Yi Wu・Mingzhe Rong（Xi'an Jiaotong Univ.）・Guangyao Jin（Henan Pinggao Electric）
pp. 209 - 212
EMD2013-126
Prediction of Temperature Rise in MV Switching Cabinet
○Duanlei Yuan・Haiyan Wang（PingGao Group）・Jian Liu・Joseph Yan（The Univ. of Liverpool）
pp. 213 - 216
EMD2013-127
Study on Propagation Characteristics of PD-induced Electromagnetic Wave in GIS with T Shaped Structure
○Tianhui Li・Mingzhe Rong・Dingxin Liu・Xiaohua Wang（Xi'an Jiaotong Univ.）
pp. 217 - 220
EMD2013-128
Magnetic field simulation research of new TMF-AMF contacts
○Wenyi Li・Min Li・Xiaoqin Wang・Shuping Sun・Lansuo Yang（Tianjin Pinggao Intelligent Electric）
pp. 221 - 224
EMD2013-129
Computational study of arc behavior under external magnetic field in an SF6 circuit breaker
Junmin Zhang・○Minmin Niu（Beihang Univ.）
pp. 225 - 228
EMD2013-130
The influences of nozzle structural parameters on gas flow for SF6 circuit breaker
Junmin Zhang・○Zhuo Wu（Beihang Univ.）
pp. 229 - 232
注： 本技術報告は査読を経ていない技術報告であり，推敲を加えられていずれかの場に発表されることがあります．