IEICE Technical Report

Online edition: ISSN 2432-6380

Component Parts and Materials

Workshop Date : 2023-02-28 / Issue Date : 2023-02-21

CPM2022-85
Fabrication and Evaluation of Zinc Oxynitride Thin Films Using Atomic Layer Deposition
Taichi Tasaki, Kentarou Saito, Kensaku Kanomata, Masanori Miura, Bashir Ahmmad, Humihiko Hirose (Yamagata Univ.)
pp. 1 - 4

CPM2022-86
Fabrication and evaluation of ZnO-TiO2 composite oxide films using room temperature atomic layer deposition
Haruto Suzuki, Kentaro Saito, Kensaku Kanomata, Masanori Miura, Bashir Ahmmand, Fumihiko Hirose (Yamagata Univ)
pp. 5 - 8

CPM2022-87
Fabrication and evaluation of iron oxide thin films using room temperature atomic layer deposition
Ryoji Onishi, Kentaro Saito, Kensaku Kanomata, Masanori Miura, Bashir Ahmmad, Fumihiko Hirose (Yamagata Univ.)
pp. 9 - 11

CPM2022-88
Fabrication and Evaluation of Aluminum Silicate Thin Films Using Room Temperature Atomic Layer Deposition
Hibiki Takeda, Ryou Miyazawa, Kensaku Kanomata, Masanori Miura, Bashir Ahmmad, , Fumihiko Hirose (Yamagata Univ.)
pp. 12 - 15

CPM2022-89
Improving efficiency of Dye-Sensitized Solar Cells by surface modification
Sho Kamiyama, Kentaro Saito, Kensaku Kanomata, Masanori Miura, Bashir Ahmmad, Shigeru Kubota, Fumihiko Hirose (Yamagata Univ.)
pp. 16 - 18

CPM2022-90
Properties of Li(0.998-x)K0.002NaxNbO3 ceramics
Mitsuki Fujihara, Noriko Bamba (Shinshu Univ.)
pp. 19 - 22

CPM2022-91
Development of electrolyzed water battery -- Effect of light-response spacer film with CZTS/CdS core-shell particles --
Shotaro Osaki, Myo Than Htay, Yoshio Hashimoto (Shinshu Univ.)
pp. 23 - 26

CPM2022-92
Preparation of Cu2SnS3 thin film by sulfurization under saturated vapor pressure
Masanori Hashimoto, Myo Than Htay, Hideo hashimoto (Shinshu Univ.)
pp. 27 - 30

CPM2022-93
Preparation of Cl Doped SnS Thin Films
Naoki Yamamoto, Myo Than Htay, Yoshio Hashimoto (Shinshu Unv.)
pp. 31 - 34

CPM2022-94
Photovoltaic properties of boron carbide thin films prepared by magnetron sputtering using hydrogen gas
Tatsuya Nishida, Masayoshi Sato, Yasuyuki Kobayashi, Yoshiharu Enta, Hideki Nakazawa (Hirosaki Univ.)
pp. 35 - 38

CPM2022-95
Construction of an evaluation platform for specific membrane capacitance through the combination of optical microscopy and artificial cell membrane system
Hironori Kageyama, Maki Komiya, Teng Ma, Ayumi Hirano-Iwata (Tohoku Univ.)
pp. 39 - 40

CPM2022-96
The effects of Dy and Al substitution on magneto-optical properties in Bi substituted yttrium iron garnet
Ilham Zaki Bin Mohd Daud, Hideya Aoki, Sumiko Bharti Singh Chauhan (TUT), Kazune Anai (NIT, Tokyo College), Yuichi Nakamura (TUT), Shinichiro Mito (NIT, Tokyo College), Lim Pang Boey (TUT)
pp. 41 - 44

CPM2022-97
*
Kar Mun Lee, Ryugo Tero (TUT)
pp. 45 - 47

CPM2022-98
Development of adaptive automatic analysis algorithm for single ion channel currents based on Kalman filter and Gaussian Mixture Model clustering
Madoka Sato, Hariyama Masanori, Komiya Maki, Ayumi Hirano-Iwata (Tohoku Univ.)
pp. 48 - 49

CPM2022-99
The effect of focal position on the observation image of magnetic interference fringes by scanning magneto-optical microscope
Yuya Suzuki, Konan Mukuo, Yuichi Nakamura, Lim Pang Boey (TUT)
pp. 50 - 53

CPM2022-100
Fundamental study of magneto-optical imaging for defect depth estimation using image processing with imageJ
Shunsuke Fukuchi, Takuma Shimada, Masato Maekawa, Toshiya Itaya, Ryosuke Hashimoto (NITS)
pp. 54 - 57

CPM2022-101
RF-Induced Current in Networks of Gold Nanoparticles with Two Different Diameters
Yuki Hayashi, Kaito Kobayashi, Kento Fujikura, Hiroshi Shimada, Yoshinao Mizugaki (UEC Tokyo)
pp. 58 - 61

CPM2022-102
Temperature dependence of specific capacitance extracted from repeated EIS measurements of free-standing DPPC bilayer membranes
Shoya Ueda, Yoshihiro Shimada, Daiki Hiramatsu, Masataka Moriya (UEC Tokyo), Daisuke Tadaki, Ayumi Hirano-Iwata (Tohoku Univ.), Yoshinao Mizugaki (UEC Tokyo)
pp. 62 - 65

CPM2022-103
Organic molecule embedded CdxZn1-xS nanoparticles for photocatalytic hydrogen production via water splitting
Yuki Shizuya, Areef Billah, Shigeru Kubota, Fumihiko Hirose, Bashir Ahmmad Arima (Yamagata Univ.)
pp. 66 - 69

CPM2022-104
Synthesis and characterization of La and transition metal (Ti/Cr) co-doped BiFeO3 ceramics
Yuki Matsuno, Areef Billah, Shigeru Kubota, Fumihiko Hirose, Bashir Ahmmad Arima (Yamagata Univ.)
pp. 70 - 73

CPM2022-105
Synthesis and characterization of YFeO3 nanoparticles
Tomo Kaneyama, Yuki Matsuno, Areef Billah, Fumihiko Hirose, Bashir Ahmmad Arima (Yamagata Univ.)
pp. 74 - 77

CPM2022-106
Study of atomic-layer-deposition TiO2 films for strong capacitive coupling of microdevices
Fumihiro Takada, Yoshinao Mizugaki, Hiroshi Shimada (UEC)
pp. 78 - 81

Note: Each article is a technical report without peer review, and its polished version will be published elsewhere.

The Institute of Electronics, Information and Communication Engineers (IEICE), Japan