Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
MBE |
2024-05-11 14:20 |
Toyama |
|
Design of a Workflow for Removing Unnecessary Components in 3D Mesh Model Toward the Automation of Spinal Orthosis Production Based on CT Images of Individual Users Takahiro Koga, Shintaro Kasai, Hiroaki Wagatsuma (Kyutech) MBE2024-3 |
(To be available after the conference date) [more] |
MBE2024-3 p.10 |
NC, MBE (Joint) |
2024-03-12 11:40 |
Tokyo |
The Univ. of Tokyo (Primary: On-site, Secondary: Online) |
Research Trends in 3D Foot Scanning for Health Assessment
-- Aiming to improve the Ashiken Foot Printer -- Katsuaki Miike (Shinshu Junior Col.), Mizue Kayama (Shinshu Univ.) MBE2023-79 |
Diagnosis feet by a specialist such as a doctor or reading of the skeletal structure of the foot by x-ray or CT scan are... [more] |
MBE2023-79 pp.58-63 |
WIT, HI-SIGACI |
2023-12-06 13:25 |
Tokyo |
AIST Tokyo Waterfront (TBD) |
Comparison of foot orthosis made of PLA (Poly-Lactic Acid) resin material and glass wool-impregnated polypropylene resin material using a 3D printer Tadasuke Onishi (JIU), Kinatu Fukushima (Chiba Rehab) WIT2023-26 |
Thermoplastics are commonly used in the production of handmade foot orthoses. In particular, polyethylene and polypropy... [more] |
WIT2023-26 pp.9-12 |
EMT, IEE-EMT |
2023-11-10 10:45 |
Yamaguchi |
Kaikyo Messe Shimonoseki |
Demonstration for Linear-Circular Polarization Converter Fabricated by 3D Printer in 300 GHz Band Shonosuke Hirokawa, Kiyoto Asakawa (TMCIT), hijiri shimokawadoko, Michihiko Suhara (TMU) EMT2023-73 |
In recently, the terahertz band (frequencies above 300 GHz), which is currently not in commercial use, is expected to be... [more] |
EMT2023-73 pp.58-63 |
ET, IPSJ-CLE |
2023-06-18 10:00 |
Tokyo |
Tokyo Metropolitan University (Primary: On-site, Secondary: Online) |
Learning Effects of Lathe-Turned Model Product using 3D Printer for Manufacturing Education Kimika Hamamura, Sho Ooi (OIT) ET2023-8 |
When teaching a classroom course on machine tools, machined brass or stainless steel parts are brought into the classroo... [more] |
ET2023-8 pp.25-31 |
MW |
2023-05-19 13:00 |
Kyoto |
Ritsumeikan University (Primary: On-site, Secondary: Online) |
Downsized OMT with an offset axial direction port Hidenori Yukawa, Ryuya Seki, Toru Fukasawa, Yoshio Inasawa (Mitsubishi Electric corp.) MW2023-17 |
The miniaturization of OMT (Ortho-Mode-Transducer) is one of the development issues in antenna feed systems for satellit... [more] |
MW2023-17 pp.43-48 |
EMD |
2023-03-03 13:45 |
Saitama |
NIT and Online (Primary: On-site, Secondary: Online) |
Research on mechanism for bathing assistance for disabilities Hirokazu Saito, Ryo Nagase (CIT) EMD2022-23 |
The purpose of this study was to develop an arm-supporting mechanism that enables a patient with physical disabilities t... [more] |
EMD2022-23 pp.15-18 |
AP |
2022-05-19 14:50 |
Hyogo |
Kobe Port Oasis (Primary: On-site, Secondary: Online) |
Gradient Index Lens Using Perforated Dielectric Wenyi Shao, Qiang Chen (Tohoku Univ.) AP2022-19 |
As the frequency of wireless communications of the next-generation becomes higher and higher, array antennas of high gai... [more] |
AP2022-19 pp.45-50 |
WIT, IPSJ-AAC |
2022-03-09 09:55 |
Online |
Online |
Development of joint and tongue models by 3D printer for the education of visually impaired students Kouhei Oya, Tetsuya Watanabe (Niigata Univ.), Yoichi Hosokawa (Meiko Univ.) WIT2021-50 |
By using 3D printers, we developed anatomy models, eight joint models and twelve tongue models for acupuncture and massa... [more] |
WIT2021-50 pp.41-46 |
RCS, SR, SRW (Joint) |
2022-03-04 16:50 |
Online |
Online |
Design and Implementation of Narrow-Band Waveguide Band Pass Filter Based on 3D Printing Technology Aerman Tuerxun, Ping Du, Akihiro Nakao (UTokyo) RCS2021-294 |
With the development of communication technology and the rapid increase of communication devices, the frequency bands fo... [more] |
RCS2021-294 pp.212-217 |
HPB (2nd) |
2022-02-28 16:23 |
Online |
Online |
A Portable IoT Devices Enabling Real-Time Monitoring of Indoor Air-Quality Data Zhaode Ding, Masayuki Iwai (TDU) |
(To be available after the conference date) [more] |
|
MW |
2021-11-19 10:20 |
Kagoshima |
Kagoshima University (Primary: On-site, Secondary: Online) |
Study on complex permittivity measurements for dielectric plates using a 3D printed 2.4GHz band cavity resonator Yusuke Morita, Takashi Shimizu (Utsunomiya Univ.) MW2021-76 |
We investigate a measurement accuracy of complex permittivity using a low-cost and lightweight 2.4 GHz cavity resonator ... [more] |
MW2021-76 pp.52-57 |
SIP, IT, RCS |
2021-01-21 09:00 |
Online |
Online |
LoRa RSSI Measurements based on the Three-dimensional Printer Issei Makino, Nobuhiko Miki (Kagawa Univ.) IT2020-63 SIP2020-41 RCS2020-154 |
In recent years, the demand for indoor IoT has been increasing, as exemplified by factory automation. The indoor propaga... [more] |
IT2020-63 SIP2020-41 RCS2020-154 pp.1-5 |
WIT, HI-SIGACI |
2020-12-10 14:30 |
Online |
Online |
3D model supplying service for blind people
-- Analysis of the service usage and questionnaire responses -- Tetsuya Watanabe (Niigata Univ.), Kazunori Minatani (DNC), Masakazu Iwamura (Osaka Pref. Univ.) WIT2020-19 |
To realize a society in which visually impaired people can obtain and touch what they want to know whenever they like an... [more] |
WIT2020-19 pp.7-12 |
MW |
2019-11-15 13:40 |
Okinawa |
Minami Daido Villa. Tamokuteki Koryu Center |
Study on complex permittivity measurements of thermoplastic resins for 3D printer using NRD guide Takashi Shimizu, Takuma Konno, Yoshinori Kogami (Utsunomiya Univ.) MW2019-117 |
Complex permittivity measurement method of thermal plastic resin rod are studied using millimeter wave transmission char... [more] |
MW2019-117 pp.99-103 |
EMCJ, MW, EST, IEE-EMC [detail] |
2019-10-24 11:15 |
Miyagi |
Tohoku Gakuin University(Conf. Room 2, Eng. Bldg. 1) |
T-Junction OMT with 45-degree tilted Waveguide Ports Hidenori Yukawa, Yu Ushijima, Toru Takahashi, Naofumi Yoneda, Moriyasu Miyazaki (Mitsubishi Ele. Corp.) EMCJ2019-41 MW2019-70 EST2019-49 |
A T-junction OMT (Ortho-Mode-Transducer) is well known as one of waveguide components that separate two orthogonal linea... [more] |
EMCJ2019-41 MW2019-70 EST2019-49 pp.27-32 |
SSS |
2019-09-24 13:00 |
Tokyo |
|
Analysis of dielectric breakdown characteristics for additive manufacturing materials made by selective laser sintering Hiroaki Arai, Yuki Yamauchi, Takeshi Ueno (TIRI) SSS2019-17 |
Additive Manufacturing (3D printer) can easily design and make parts with complex shapes. Because of that, it is used in... [more] |
SSS2019-17 pp.1-4 |
SANE |
2019-08-23 16:20 |
Tokyo |
Electric Navigation Research Institute |
[Special Talk]
Visualization of Aviation Weather for Education and Safety Naoki Arai, Daisaku Noma (Tokai Univ.) SANE2019-45 |
Weather is an large factor for aircraft operation. It is essential for safe and efficient operation that good decision m... [more] |
SANE2019-45 pp.55-58 |
MW, EST, OPE, MWP, EMT, IEE-EMT, THz [detail] |
2019-07-18 13:40 |
Hokkaido |
Hakodate City Central Library |
Design and Evaluation of 3-Dimensional Printed Reflector Fresnel Lens Antenna Based on Acrylonitrile Butadiene Styrene Plastics for W-Band Millimeter-Wave Radar Applications Shunichi Futatsumori, Nobuhiro Sakamoto, Tomio Soga (ENRI) EMT2019-13 MW2019-26 OPE2019-17 EST2019-15 MWP2019-13 |
This report discusses the design and evaluation of 3-dimensional (3D) printed reflector Fresnel lens antenna based on Ac... [more] |
EMT2019-13 MW2019-26 OPE2019-17 EST2019-15 MWP2019-13 pp.41-45 |
MW, ICD |
2019-03-14 10:30 |
Okinawa |
|
Millimeter wave complex permittivity measurements of dielectric disks with different internal structures using the WG mode method Kota Tsunoda, Takashi Shimizu, Yoshinori Kogami (Utsunomiya Univ.) MW2018-157 ICD2018-101 |
A FDM type 3D printer can output a dielectric substrate for millimeter wave circuit by laminating a thermoplastic resin.... [more] |
MW2018-157 ICD2018-101 pp.7-12 |